Satin White Vinyl Wrap (CK903)

Like a clean canvas, TeckWrap White Satin represents a fresh start. It symbolizes potential. Wrap to unlock new possibilities.

With a collection of 10 stylish colors in both matte and gloss material, TeckWrap offers you this series of white chameleons vinyl wrap, which gives your vehicle a distinctive finish where it is partly shady with extraordinary luster. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but reasonable and affordable.  

Specifications

Conformable and highly flexible PVC material can be molded to almost every part of a vehicle. Suitable for complete car wrapping (or any other smooth or curved surface).

• Film Thickness: 0.14 mm
• Backing Liner Thickness: 0.14 mm
• Total Thickness (with liner): 0.28 mm
• Film Type: High-grade polymeric calendared vinyl film with air-release channels

Adhesive & Liner

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double-side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 14001, OHSAS 18001)

Performance

• Storing Period: 2 years if stored at +10°C to +20°C, with relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place
• Durability / Warranty: Datasheet (Click the link)
• Dimensional Stability: Shrinkage of less than 2%
• Plastification: 23%–32%
• Breaking Strength: 25.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• Peel Strength: 8.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04
• Light Ageing in UV Exposure: Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test Result: 4–5
• Exposure Cycle: ASTM D4329-13 Cycle A
• Lamp Type: UVA-340
• Exposure Conditions: 8h UV at (60±2.5)°C BPT, 0.89 W/(m²•nm) @340nm, 4h condensation at (50±2.5)°C BPT, Exposure Duration: 48h

Install tips:

Temperature: from +17°С to +19°С, usage from -45°С to +45°С
Tools: Standard squeegee with a soft buffer
Conformability: smooth and medium curved surface
Directional: yes
Overlap width: 3-4mm

Post heating: 100°C; cure time: 48 hours
Package: Roll width 152 cm, length 18 m, weight 14 kg

Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out. The warranty does not cover the scratching of the film.