SKU: CK202-HD-5M

Gloss Metallic Ebony Sparkle Vinyl Wrap (CK202-HD)

(7)
689.00 NIS
Tax included Shipping calculated at checkout.

Description

Black is the most common colour on the road and the most anonymous. Plain gloss black wraps make it worse, they read as a cheap respray and swallow every body line on the car. Factory metallic blacks solve it in theory, but the flake is usually so fine you need to be a metre away to find it. TeckWrap Gloss Metallic Ebony Sparkle puts flake in the black that you can actually see.

Key Attributes

  • Flake you can pick out individually: deep gloss black base carrying discrete metallic particles that read as distinct points of light rather than an even shimmer.
  • Glitter-effect polymeric hybrid film: premium multilayered construction with air-release channels keeps the gloss even across roofs and bonnets, so the flake stays the thing you notice.
  • Weather-ready adhesive, clean release: Henkel solvent acrylic stays transparent and ultra weather-resistant, and is heat-removable within two years for the cleanest removal on a sound OEM finish.
  • Prep shows through more than on any other colour: gloss black is the least forgiving finish there is, dust, grit, and sanding marks under the film will read through it, so the substrate work matters as much as the lay-down.
  • Directional glitter film: conforms over smooth and medium-curved surfaces, and needs consistent orientation plus one production LOT per vehicle, since flake density is what varies between panels if you mix them.

TeckWrap Ebony Sparkle spends daylight looking like an exceptionally deep piano black, with the flake dormant under cloud and in shade. Direct sun switches it on, the surface breaks into a field of individual bright points rather than the soft haze a fine metallic gives you. Where it earns its money, though, is under artificial light, streetlights, forecourt LEDs, car park lighting, headlights sweeping past. Against a plain gloss black there's no contest, and against a factory metallic black the flake is actually visible from normal walking distance.

OEM Match

  • Closest to Nissan Meteor Flake Black Pearl.
  • Same flake visibility as Cadillac Black Diamond Tricoat.
  • Coarser flake than Audi Mythos Black Metallic.
  • Brighter sparkle than Mercedes-Benz Obsidian Black Metallic.
  • Far more active than Ford Shadow Black.

Sparkle blacks are a paid upgrade on premium trims, and even then the flake is usually held back to something you have to hunt for. Ebony Sparkle is the way to change your car's colour without leaving black, which makes it the low-risk pick for anyone who wants presence without committing to a colour they'll tire of, on sedans, coupes, SUVs, and trucks alike.

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid film with glitter effect and air-release channels
  • Series: 190 Series
  • Film thickness: 0.14 mm
  • Liner thickness: 0.13 mm
  • Total thickness with liner: 0.30 mm
  • Liner: transparent plastic release liner (0.03 mm) with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra weather-resistant, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: gloss glitter metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 14 kg

Performance

  • Service temperature: -35°C to +35°C
  • Dimensional stability: shrinkage less than 2%
  • Plastification: 28% to 38%
  • Breaking strength: 23.7 N/10mm avg (ASTM D3759/D3759M-05)
  • 180° peel strength to steel: 6.4 N/10mm avg (ASTM D3330/D3330-04)
  • UV resistance: grade 3 to 4 (ASTM D4329-13 Cycle A, ISO 105-A02), 44h exposure
  • Storage: 2 year shelf life at +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight

Warranty

Built for long-term outdoor use, with up to 3 years of durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Horizontal surfaces such as roofs, hoods, and bonnets take the most sun and weather and carry a shorter expected life. The warranty covers manufacturing defects such as bubbling, cracking, and adhesive failure when the film is properly stored, professionally installed, and maintained per the care guidance. It does not cover abrasion, scratches, gloss change, or normal wear. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application
  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 90°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3 to 4 mm
  • Directional film, especially metallic and glitter colors. Keep film orientation consistent across all panels and use one production LOT per vehicle to avoid finish variation between panels.
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a pH-neutral shampoo (pH 3 to 11). Avoid waxes, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

Metalized and glitter films may show fine surface sparkle variation with viewing angle and lighting. This is a characteristic of the finish and is not a defect.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |