When wrapping around a raised area like antenna or door handles, it usually takes time to form the vinyl wrap film around or spend quite a few attempts creating a proper template. Forming the...
Car wrap tips
Overlap made with Knifeless Tape plays an essential role in vinyl film wrapping, especially on a curvy section. For example, the top area of a back bumper, which connects to the trunk. You would go...
Many hatchback trunks are not difficult to wrap with vinyl wrap film. But there are specific trunks that are quite tricky because they have a thick and solid rear part with a very steep angle....
When wrapping up a fuel cap area with vinyl wrap film, most installers tend to make the blade of the knife parallel to the cap side (which can also be called an empty side), and...
Wrapping with vinyl wrap film with no air-release technology is always tricky as the material tends to be aggressive. And it can be very challenging to wrap a roof of a vehicle. Here are...
When wrapping a vehicle with vinyl wrap film, it becomes a little tricky when it comes to the bottom moldings of side windows. Installers usually tend to bridge the material over the molding and the...
There are many precut vinyl stripes available out there in the market, which are very convenient for partial vinyl wrapping projects. But when you have to apply it to a curvy section, it becomes frustrating,...
When you wrap up a section with a very tight molding that have metal inside, for instance, a window, you might want to leave the molding on during your install to avoid damaging it, or...
