Common Mistakes When Applying Color PPF
You have just invested in a premium dry-install color PPF and are excited to apply it to your car, hoping for a clean, perfect finish. Yet the process is more...
Installation Articles
Common Mistakes When Applying Color PPF
-
Carbon vinyl: beauty requires better knowledge｜TeckWrap
Carbon wrap film has been one of the most popular types of vinyl wrap in the market. Its stylish appearance makes a vehicle stand out on the road uniquely. However,...
-
Smoother wrapping process: tricky molding removal｜TeckWrap
Taking off moldings can significantly help the vinyl wrapping process. It is not a must to remove all hardware during an application. But for particular sections, without the moldings, you...
-
Flat and smooth vinyl: No more adhesive line｜TeckWrap
When wrapping with vinyl film, if there is an adhesive line, it can always ruin a finish. But sometimes, even though the surface is thoroughly clean and you handle the...
-
Clean and wrap right away? Not suitable for all vinyl films｜TeckWrap
It is easy to think that you are ready to install the vinyl film immediately as long as the surface is thoroughly cleaned and prepped. For gloss car wrap, this...
-
Hot or cold? Make vinyl wrapping under control｜TeckWrap
Climate matters a lot for the durability of vinyl film, as it can affect the life span of a car wrap. In the same way, the temperature in a wrapping...
-
Hood wrapping with vinyl: Which direction?｜TeckWrap
Today, many of the most popular types of vinyl wrap are directional films, including gloss and matte metallic, satin, and carbon fiber wraps. When wrapping with this kind of material,...
-
General tips for roof wrapping｜TeckWrap
Wrapping a roof with vinyl wrap film can be easy or sometimes challenging, depending on whether you have the right approach and pay attention to some small things. Here are...
-
Vinyl craft: General tips for cutting｜TeckWrap
For vinyl installation, cutting is a must-learn technique. It is also a skillful job and can determine whether you can achieve a perfect paint-like finish, which is the ultimate goal...
-
Vinyl stretching: Do it cold｜TeckWrap
Most vinyl wrap films in the market today have memory effect. At some point, a wrapper aims to eliminate the material’s memory to achieve a perfect finish. But sometimes, you...
-
Wrapping: Level up your vinyl squeegeeing skill｜TeckWrap
As an essential skill for vinyl film wrapping, squeegeeing matters a lot when installing a material. Doing it wrong might damage the film and lead to failure. Here are some...
-
Vinyl wrapping: what you shouldn’t neglect during the process｜TeckWrap
Installing vinyl wrap film is never only about wrapping. Many other things involved during the process are as important as the installation itself because the key to a perfect finish...
-
Vinyl wrapping: bumper with extended area at the bottom｜TeckWrap
Some bumpers have an attached extended area at the bottom, making the wrapping process a little bit complicated. It is ok to wrap the whole area in one piece for...
-
Wrapping sided hood in one piece｜TeckWrap
Usually, a hood is a straightaway piece of cover secured at the front of a vehicle. But some are sided with a one-centimeter-wide area underneath on the left and right....
