Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
Precise template for emblem reinstall after vinyl wrapping | TeckWrap
Oftentimes, emblems ought to be removed to ensure a smooth vinyl wrapping process. For some vehicles like Corvette, Peugeot or Range Rover, their emblems are made up with separate letters,...
-
Vinyl wrapping hood with thick edge and sharp corner | TeckWrap
Wrapping a hood with vinyl film is usually a relatively easy job. But if you are dealing with a composite one like Corvette Stingray’s, it can be a little tricky...
-
Vinyl wrapping curvy antenna | TeckWrap
Wrapping an antenna in one piece of vinyl film is easy if you have a clear mind regarding what you are doing. But wrapping a curvy antenna like one on...
-
Measure vinyl film and separate it into sections | TeckWrap
A precise measurement is the first step to a successful vinyl film wrapping project. It is essential to know how much wrap material you need for the work. This can...
-
Vinyl wrapping Tesla trunk | TeckWrap
Tesla is known for their sleek and futuristic design, but some car lovers may want to customize their cars and give them a personal touch. One way to do that...
-
Keep your vinyl film look new with these tips | TeckWrap
Vinyl wrap film is excellent for customizing your car and protecting its original paint from damage. However, wrapping your car is not a one-time deal. A car wrap requires regular...
-
Vinyl wrapping Tesla door handle | TeckWrap
Wrapping a Tesla Model 3 door handle with vinyl wrap film is not easy because it goes into the body of the car, and it is tricky to remove. Also,...
-
Vinyl wrapping inset letters | TeckWrap
For some vehicles like trucks, there can be inset letters on the surface, and the area is small and shallow. For some installers, it is tempting to bridge the vinyl...
-
Stress-free roof rack wrapping | TeckWrap
There is a type of roof rack that sits on both sides of a car, which is mentioned previously, and is simple to wrap with vinyl wrap film in one...
-
Vinyl wrapping: Rear light chrome delete | TeckWrap
Getting a rear light chrome delete with vinyl wrap film can create a unique customized look for your vehicle. But some of these lights have compound curves around them, which...
-
Vinyl wrapping emblems with leftover film | TeckWrap
You usually have several leftover pieces when wrapping a vehicle with vinyl wrap film. To make the most of these materials, you can use them to wrap up the emblems...
-
Car wrapping: Rocker panel application | TeckWrap
Some rocker panels, like Mercedes’, have a severe 90-degree turn at the corners, which is tricky to wrap with vinyl wrap film. It is easier to wrap this section separately....
-
Precut vinyl: Safe window chrome delete | TeckWrap
Oftentimes, it can be challenging to install chrome delete vinyl on a window molding because it is easy to cut the rubber accidentally. But using a precut piece can significantly...
