Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
Tackle flat bumper sensor | TeckWrap
A flat bumper sensor is not too tricky to wrap with vinyl wrap film, and the only thing that makes it challenging to handle is the soft molding around itself,...
-
Fixing lifting vinyl film on mirror | TeckWrap
Most mirrors have a severe compound curve, which creates massive tension when wrapping with vinyl film. And the material on the edge will lift or peel over time if you...
-
Full print film: All-in-one guideline | TeckWrap
For personalization, branding, or commercials, a full print wrap film is undoubtedly an excellent choice, impactful media to express for individuals, and a powerful billboard for the business. But...
-
Tesla wrapping: Perfect front door | TeckWrap
A Tesla front door is nothing tricky to wrap. But still, proper skills are needed. Here is a demonstration of wrapping this section of a Model 3: Thorough cleaning...
-
Textured vinyl film: One-piece mirror | TeckWrap
A mirror is usually tricky to wrap. And textured film can be challenging to handle. Thus, when wrapping a mirror with textured material like carbon, you will need the right...
-
Stress-free corner wrapping: Take advantage of vinyl memory effect
A corner is always one of the most challenging spots to do car wrapping. But with the right approach and some tricks, you can quickly achieve a tension-free, high-quality wrapped...
-
Wrapping with pre-cut vinyl film | TeckWrap
Cutting material such as craft vinyl film is a must-have for personalizing your vehicle or branding for a business purpose. It is also a good choice when you feel like...
-
Car wrapping: Maintain heat gun in good shape | TeckWrap
Many car wrap installers might have experienced that scraps of the vinyl film end up getting to the tip of your heat gun. This is something you should deal with,...
-
Key fact about gloss car wrap | TeckWrap
A gloss car wrap is not that difficult to wrap with, and this is because of its easy-going properties. Here are some key facts about it. Let’s check out how...
-
Vinyl Cutting: What you should pay attention | TeckWrap
Cutting is an essential skill for every wrapper installing vinyl film. A clean cut can distinguish a perfect finish from other wrap jobs. Yet a bad cut can ruin your...
-
Car wrapping: Eliminating impression on roll | TeckWrap
Often, for a color-change or full print car wrap roll, there will be impressions like scratches or stripes on its surface, whether it is gloss or matte vinyl. This might...
-
Proper workflow: Wrapping Tesla hood with vinyl film | TeckWrap
The hood of Tesla is usually not complicated to wrap with vinyl film. With the right approach and workflow, it can become one easy-peasy. Here is how you can do...
-
Leave the antenna on for vinyl wrapping | TeckWrap
Sometimes, it makes the vinyl wrapping process much easier when removing all the hardware in a section. But sometimes it is not. For example, when wrapping a roof, it is...
