SKU: CG16-HD-5M

Super Gloss Slate Grey Vinyl Wrap (CG16-HD)

(3)
€200,95
Tax included Shipping calculated at checkout.

Description

Slate Grey is a soft luxury porcelain-grey, one of the most OEM-looking greys in the lineup. It sits between Porsche Chalk, Audi Suzuka Grey, and Porsche Heron Grey, and in motion it develops a creamy porcelain base with a soft warm undertone, pearl-clean reflections, and a smooth, non-aggressive luxury behavior. It reads closer to Porsche design language than to a standard aftermarket grey. Where most light greys go primer-cement, flat, or too white in motion, this one stays elegant and architectural, quietly Porsche-coded, with the soft pastel-luxury character of high-end European OEM grey.

This is the porcelain-luxury grey of the lineup, distinct from the other grey sub-families. True Nardo Grey is the technical-performance grey with Audi RS energy, Amazon Grey is the icy storm-grey with Scandinavian EV energy; Slate Grey is the soft, elegant, OEM-passing one with Porsche Chalk and Audi Suzuka DNA. It suits European luxury and sport builds: a Porsche 911, Cayman, or Macan, an Audi A5, Q3, or R8, a BMW 2 Series, 4 Series, or i4, a Mercedes CLA or C-Class, a VW Golf R, Scirocco, or Arteon, a Bentley Continental GT, an Aston Martin Vantage, a Lexus IS or LC, a Genesis G70 or GV60, a Range Rover Velar, or a Tesla Model 3 Highland.

On OEM references the primary anchor is Porsche Chalk and Crayon, with Audi Suzuka Grey Metallic and Porsche Heron Grey as the closest emotional match, plus the BMW soft porcelain-grey direction and a lighter Lamborghini Bianco Canopus alongside.

Key attributes:

  • Super Gloss HD vinyl wrap, soft luxury porcelain-grey with warm pearl-clean reflections
  • Premium polymeric hybrid film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, removable
  • High-grade PET release liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m or 23 m

Performance

  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Application
  • Apply at +17°C to +23°C
  • Service range: -30°C to +45°C
  • Soft squeegee with buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Overlap: 3–4 mm
  • Non-directional film
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |