SKU: GAL35-HD-5M

Deep Gloss Amber Gold Vinyl Wrap (GAL35-HD)

(2)
Regular price €200,95
Shipping calculated at checkout.

Description

The gold that stays quiet, where most golds in the market chase flash and chrome-yellow shine.

Key attributes:

  • Deep gloss champagne-bronze metallic with very fine flake and smooth, liquid-metal reflections
  • Multilayered polymeric hybrid film with aluminum-flake metallic, built for wet-paint depth and clean gloss
  • Henkel solvent acrylic adhesive, transparent and weather-resistant, peels off without residue
  • High-grade PET release liner keeps the film flat through install, delivering a smooth mirror gloss
  • Heat-stretchable across edges, mirror housings, and moderate recessed areas
  • Safe removable adhesive, factory paint underneath stays untouched

Amber Gold is the quiet one. Where a lot of golds want to flash, this one stays soft and refined, a champagne-bronze with very fine flake that keeps the reflections smooth rather than sparkly. The deep gloss gives it a liquid-metal look instead of a tuner shine. It lives somewhere between champagne gold, bronze, satin beige-gold, and warm metallic sand, and it photographs differently every time you look at it: muted champagne under cloud, satin bronze indoors, rich amber in direct sun, warm honey gold at sunset. That shifting, hard-to-pin-down quality is exactly how an expensive factory metallic behaves.

In the Galaxy lineup this is the understated, executive gold. Its sibling Royal Saffron is the loud, jewel-toned GT version; Amber Gold is the opposite temperament, the color you choose when you want presence without noise. It reads less yellow than an AMG Solarbeam, less coppery than a rose gold, less silver than a plain champagne. It belongs on cars where that restraint is the point: a Mercedes S-Class or G-Wagon, a Porsche Panamera or Cayenne, a BMW 7 or 8 Series, a Bentley Continental or Bentayga, a Range Rover or Defender, an Aston Martin DB12 or DBX, an Audi A8 or Q8, or a Lexus LS.

For wheels, keep them as composed as the color: satin black, brushed bronze, champagne silver, or dark graphite.

On the OEM side it's closest to Mercedes Kalahari Gold and Champagne Metallic, sharing that muted champagne-sand character. Porsche White Gold and Platinum Metallic are near on the creamy, soft-reflection side. Among modern EVs, the BYD and Yangwang champagne-bronze tones match it well, and older GM Sandstone / Champagne Silver finishes are comparable in cloudy light. Aston Martin's elegant bronze-golds round it out.

Features

Film construction

  • Film type: Advanced polymeric multilayered film with silver coating and air-release channels
  • Film thickness: 132 μm
  • Liner thickness: 180 μm (plastic high-gloss liner)
  • Adhesive: Henkel solvent polyacrylate, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 μm dry
  • Finish: High-Gloss aluminum metallic, directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)

Performance

  • 180° Peel strength: 9.7 N/25mm (standard ≥7.85)
  • Initial tack: 1055 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70 (standard ≥60, no shifting)
  • Aging tested: -65°C to +65°C, no residue
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation

Application

  • Apply at +17°C to +23°C
  • Service range: -45°C to +45°C
  • Directional film — orient all panels the same direction for consistent metallic flake appearance
  • Soft squeegee with buffer
  • Conformability: flat, curved, and recessed surfaces (stretchable, do not overstretch)
  • Post-heat: 100°C flat surfaces, 120°C curves and overlaps
  • Steam vacuum or IR heater recommended for installation
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.