SKU: SMT22-5M

Satin Metallic Black Tulip Vinyl Wrap (SMT22)

(1)
€183,95
Tax included Shipping calculated at checkout.

Description

TeckWrap SMT22 Black Tulip is a satin metallic vinyl wrap with an almost black base, a hidden violet glow, cool lavender reflections, and extremely low visible saturation. The color does not immediately read as purple. Under shadow it sits near piano black. Under light a soft violet haze appears. This is the near-black chromatic paint behavior that premium OEM design is moving toward in EV and luxury performance segments, where the color only reveals itself under direct light.

Compared to RB40-HD Titanium Violet, which is more expressive and visibly purple, SMT22 is far more stealth, more architectural, more concept-vehicle. The character is luxury electronics, aerospace materials, stealth aircraft coatings, and modern hyper-EV aesthetics rather than tuner purple or showcar flash. Best on premium EVs and stealth-luxury builds: Tesla Model S Plaid and Cybertruck, Cadillac Celestiq, BMW iX and i7, Porsche Taycan, Audi RS e-tron GT, Lucid Air, Rivian R1S, Mercedes EQS, Lexus LF-Z concept-inspired builds, Genesis G90.

Close OEM color family: Cadillac Celestiq concept dark violet-black, BMW Frozen Black with purple undertones, Porsche Viola Black / ultra-dark amethyst concepts, Rolls-Royce bespoke black amethyst commissions.

Key attributes:

  • Satin metallic vinyl wrap, near-black base with hidden violet glow and cool lavender reflections
  • Pressure-sensitive high-grade polymeric vinyl film with air-release channels
  • Henkel solvent-based acrylic adhesive, transparent, removable
  • High-grade PET liner for smooth finish and adhesive protection
  • Conformable to curves, mirrors, and recessed panels
  • Safe removable adhesive, protects factory paint underneath

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-side PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, water-reactive, directional
  • Roll width: 152 cm (5 ft)
  • Full roll length: 18 m or 23 m

Performance

  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 3 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

Application
  • Apply at +17°C to +23°C
  • Service range: -45°C to +45°C
  • Standard squeegee with soft (wet) buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 65°C
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Remove protective cap before install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |