SKU: CPX412-3M

Gloss Warm Emerald Color PPF (CPX412)

€209,95
Tax included Shipping calculated at checkout.

Description

An emerald green that warms in the sun the way a real gemstone does, now in a Color PPF film with stone-chip armor underneath.

Deep gloss emerald with a warm metallic undertone, the kind of green that pulls gold light at the right angle and stays jewel-saturated everywhere else.

For your vehicle

  • Gloss color paint protection film in a warm-toned emerald green with metallic depth
  • Engineered to absorb stone chips, road debris, scratches, and chemical exposure that thin out factory paint
  • Top coat heals minor scratches and swirl marks on its own under heat or sun, no compounding or polishing
  • Hydrophobic and chemical-resistant from the surface down, water beads off and the ceramic step is no longer required
  • Fully opaque pigmented green over a self-healing PPF base, a full color change with the factory paint protected underneath
  • Sits in the territory of Bentley Verdant Green Metallic and Range Rover Tonga Green, with the armor built into the film
  • Backed by a 5-year manufacturer warranty

A warm metallic emerald has two homes in the TeckWrap range. A gloss vinyl wrap is the right call for buyers focused on the color itself, with the freedom to refresh later and a lower commitment up front. Warm Emerald is the Color PPF call, the same emerald with a stone-chip armor layer running underneath the color. Two ways to wear the gemstone, picked by the job that matters more to you.

It belongs on cars that earn a warm green well, grand tourers, luxury SUVs, executive sedans, and the modified flagships where color and protection both have to read luxury.

For installers

  • Aliphatic TPU base for impact resistance and long-term dimensional stability
  • Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
  • 344 µm total film thickness, 194 µm application layer, true PPF-class stone-chip defense
  • 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
  • 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
  • Low-tack acrylic PSA with full repositioning capability during install
  • Ultra micro-grooved PET liner with air-release channels, dry-install system
  • Faster install than wet-application PPF, with cleaner first-pass results
  • 5-year manufacturer warranty, fully traceable for installer warranty claims

Features

Film construction

  • Film type: Premium aliphatic TPU color paint protection film
  • Top coat: Fluorocarbon polyurethane (hydrophobic, anti-yellowing, chemical resistant)
  • Total thickness: 344 µm
  • Application layer thickness: 194 µm
  • Adhesive: Low-tack acrylic PSA, repositionable during install
  • Adhesive peel/tack: 1350 g/inch
  • Liner: Ultra-micro-grooved PET with air-release channels
  • Finish: Gloss color PPF, Deep Amethyst violet, opaque
  • Light transmission: 0%
  • Roll size: 5ft x 59ft (1.52 x 18m)

Performance

  • Tensile strength: 22 MPa
  • Product elongation at break: 360–430%
  • Self-healing surface (minor scratches recover with heat)
  • UV-induced color stability
  • Resistant to stone chips, road grime, light abrasions, and chemical contamination
  • Dimensionally stable across temperature variations

Warranty

5-year TeckWrap warranty against yellowing, cracking, peeling, delamination, and material defects. Improper installation, physical impact damage, and scratches beyond the self-healing range are not covered.

Application
  • Apply at +17°C to +23°C
  • Service range: -40°C to +50°C
  • Dry-install system, no wet solution required (air-release channels handle film placement)
  • Tools: squeegee with soft buffer, heat gun, knife, microfiber cloth
  • Repositionable during installation due to to low-tack PSA
  • Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
  • Post-heat: activate adhesive after final positioning
  • Cure: 24–48 hours for full adhesion
  • Use same production batch for full vehicle, label and store leftovers by batch code
  • Avoid waxing or pressure-washing for the first 7 days
  • Surface must be thoroughly cleaned and decontaminated before installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, physical impact damage, or scratches beyond the self-healing range.

As with all premium color PPF, slight variations in hue or gloss may occur between production batches. Use the same batch for a complete vehicle and order enough material from one batch for the full job. Screen images may vary, refer to physical samples. Use same production LOT for consistency across panels.

Valuable Advices

View all
  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |