SKU: SMT16-5M

Satin Metallic Jewel Green Vinyl Wrap (SMT16)

(5)
€187,95
Shipping calculated at checkout.

Description

Dark green is a hard color to get right. Too often it looks black unless the sun is directly on it. Jewel Green holds onto its green tone much better. The satin finish also softens reflections, so you see more of the color and less glare.

Key Attributes

  • Keeps its green tone: a dark emerald base with fine metallic flake stays visible in changing light instead of fading into black.
  • Satin finish: reduces harsh reflections and gives the metallic a smooth, understated look.
  • Henkel adhesive: transparent, weatherproof solvent acrylic adhesive removes cleanly without leaving residue behind.
  • PET release liner: keeps the film flat during installation for easier positioning and a cleaner finish.
  • Heat-conformable: works around mirrors, bumpers, door handles, and moderate recessed areas with less effort.
  • Paint-safe: removable adhesive helps protect the factory finish underneath.
  • UV resistant: built to help the color stay consistent through daily driving and outdoor exposure.

Jewel Green changes more than you might expect. In direct sunlight, the emerald comes forward and the metallic flake becomes much easier to notice. Move the car into open shade and the color settles into a deeper racing green with a cool blue hint underneath. The satin finish keeps everything controlled. You don't get the bright reflections of a gloss wrap, but you still see the depth sitting below the surface. That's what gives Jewel Green its character.

OEM Match

  • Closest to: Aston Martin Racing Green
  • Similar depth to: Jaguar British Racing Green
  • Deeper than: BMW Isle of Man Green
  • Cooler than: Porsche Oak Green Metallic
  • More muted than: Audi Goodwood Green

If Aston Martin Racing Green has always caught your eye, Jewel Green gives you a similar feel without limiting it to one badge. It looks just as natural on a Supra, Corvette C8, Mustang, or almost anything else you want to wrap.

Features

Film Construction

  • Film Type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film Thickness: 0.14 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer
  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |