Satin Dark Platinum Vinyl Wrap (ECH21)

Too much darkness will create turbulence, yet too much light brings cliché. TeckWrap Dark Platinum is just about right. It’s a moderate color and the easiest one to live by. Wrap now to enjoy an easygoing ride.

With a collection of 15 fancy colors, TeckWrap offers this series of satin vinyl wraps that give your vehicle a subtle look of metallic steel with a flat finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices.

Specifications

Material:

• Conformable and reliable multilayered polymeric material with stable color pigments.
• Suitable for full car wrapping (or any smooth or curved surface).

Film Details:

• Film Thickness: 121 μm
• Thickness with Release Liner: 180 μm
• Type of Film: High-grade polymeric calendared vinyl film with air-release channels

Adhesive & Release Liner:

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft (ISO 9001, ISO 140001, OHSAS 18001)

Storage & Warranty:

• Storing Period: 3 years if stored at +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
• Durability/Warranty: Datasheet – Click the link

Performance Testing

• Release Force (N/25mm): Standard 0.04–0.12, Result 0.1 (23°C, 54% RH)
• Initial Tack (g/25mm): Standard 800–1500, Result 1254 (23°C, 54% RH)
• 180° Peel Strength (N/25mm): Standard ≥7.85, Result 11.17 (23°C, 54% RH)
• Adhesion Strength: Standard ≥60, Result 70 (No shifting)

Aging Tests

• High Temperature (65°C, 7 days): No adhesive residue
• Low Temperature (-65°C, 10 days): No adhesive residue

Installation Tips

• Application Temperature: +17°C to +18°C
• Usage Temperature Range: -45°C to +45°C
• Tools Required: Soft squeegee with buffer
• Conformability: Flat and moderate curves; suitable for deep recesses with inlays
• Directional: Yes
• Overlap Width: 4–5 mm
• Post-Heating Temperature: 100°C

Package

• Roll Width: 152 cm
• Roll Length: 18 m

Important Note

• Screen images, colors, and finishes are approximate. Always check the physical color swatch for accuracy.
• Use rolls from the same production LOT number to avoid slight batch-to-batch color variations.
• The film may scratch during application or daily use. Scratching is not covered by the warranty.