Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
How much do you know about carbon vinyl wrap film?
Carbon vinyl wrap film has been very popular in the market throughout the time. But how well do you know about it? Check out these properties below and see if...
-
Wrap back fender with sharp angles in one piece of vinyl
It is not hard to wrap most parts of a back fender, except when you get to the sharp angles by the back window and the trunk, as well as...
-
Create overlap for steep license plate wrapping
Sections on vehicles vary from one another. An installer needs to read the area you are wrapping before applying the vinyl wrap film onto the surface. A different structure would...
-
Simple way to create customized look for your car with vinyl
For some vehicles, there are solid emblems (like Chevrolet’s) on its front grill or other spots like the hubcaps, which are usually the logo of the brand. This is where...
-
Wrap scooped area on back bumper in one piece of vinyl
Back bumpers vary on different vehicles. For some, there are a few scooped upper sections, which have a few grooves extending towards the trunk that make it extremely challenging to...
-
Create straight line for vinyl wrap film application
When handling a full print vinyl wrap film, one of the goals for a wrapper is to make sure the graphics stay straight on the body of the vehicle and...
-
Wrapping gap between two doors in one piece of vinyl
Recessed area is always a challenge for vinyl film wrapping. Wrapping the gap between the front door and back door is a significant example of that, as the angle is...
-
Wrap license plate area with chrome vinyl
Chrome vinyl wrap film can be tricky to deal with if you do not handle it properly. It is much thicker than other types of vinyl wrap film and stiffer....
-
Wrap Jeep grill in one piece of vinyl wrap film
A Jeep grill is kind of challenging to wrap, as it takes a significant amount of time to wrap well, and it is easy to overstretch the vinyl wrap film...
-
Pre-stretch vinyl wrap film for antenna application
Quite a few tips about wrapping an antenna with vinyl wrap film have been introduced here at TeckWrap, including creating a template for easier application, wrapping it in one piece...
-
Safe way to handle thin and aggressive vinyl wrap film
In some cases, installers need to wrap up a vehicle with a thin and aggressive vinyl wrap film. Mostly, aggressive wraps are thicker and not easy to be applied. Also,...
-
Wrapping double-sided recessed area with vinyl wrap film
It is kind of typical for a van to have double recessed areas on its side, where you see a group of squares, and they are each surrounded by a...
-
Make the best of post-heat for better vinyl wrapping result
Post-heating is always one of the most critical steps for vinyl film wrapping. But it is never just about heating the material and killing its memory. Ultimately, post-heating a vinyl...
