SKU: CG21-HD-5M

Vinylfolie „High Gloss Rolling Sea“ (CG21-HD)

(6)
Normaler Preis €202,95
inkl. MwSt. Versand wird beim Checkout berechnet.

Beschreibung

„Rolling Sea“ ist ein lebhaftes, exotisches Sport-Cyan – ein tropisches Cyanblau, das genau zwischen „Porsche Miami Blue“, „Riviera Blue PTS“ und dem klassischen Volkswagen „Miami Blue“ aus den 1970er Jahren liegt. In Bewegung entfaltet die Oberfläche eine leuchtende, bonbonartige Harmonie aus Himmelblau und Tropenblau, mit lebhafter Sättigung, einer glänzenden, elektrisierenden Fülle und einer klaren, nicht-metallischen Oberfläche, die eher an eine originale Porsche-PTS-Lackierung erinnert als an eine Aftermarket-Folierung. Auf Porsche-Karosserien wirkt es wie ein echtes Originalteil. Während die meisten leuchtenden Blautöne neonartig, kindisch oder wie ein Schwimmbadspielzeug wirken, bleibt dieser Farbton exotisch, edel und optisch raffiniert – mit der bonbonfarbenen, tropischen Ausgewogenheit einer maßgeschneiderten Porsche-PTS-Sonderanfertigung.

Dies ist der lebendige, exotische sportliche Blauton, der das Sortiment prägt. „China Blue“ steht für eleganten Pastell-Luxus, „Yacht Blue“ für sanftes Küstenhimmelblau und „Avalon Teal“ für die hochwertige Fusion aus Blaugrün; „Rolling Sea“ ist der gesättigte, exotische Farbton – eine Hommage an die PTS-Tradition von Miami/Riviera mit der cyanfarbenen Renn-DNA eines VW aus den 1970er Jahren im Hintergrund. Lebhaft und jugendlich, ohne kindisch zu wirken. Es gehört auf exotische Sportwagen, Hypercars und Instagram-taugliche Umbauten: einen Porsche 718 Cayman GT4, 911 GT3 oder GT3 RS, einen Lamborghini Huracán oder Revuelto, einen McLaren 720S oder Artura, einen Ferrari 296 GTB oder SF90, einen Audi RS6 oder R8, einen BMW M2, M3 CS oder M4 CSL, ein Mercedes-AMG GT oder GT 4-Door, ein Tesla Model S Plaid mit Widebody, ein Polestar 2 oder 4, ein Subaru WRX STI, ein Toyota GR Supra oder GR Yaris, ein Honda Civic Type R oder ein Lotus Emira.

Bei den OEM-Referenzen entspricht „Porsche Miami Blue“ am ehesten dieser Farbe, gefolgt von „Riviera Blue PTS“, dem klassischen „Volkswagen Miami Blue“, „BMW Yas Marina Blue“ in direkter Sonneneinstrahlung, „Subaru Hyper Blue“ als kühlerer Variante und dem charakteristischen „Polestar Cyan“ aus derselben Farbfamilie.

Wichtigste Eigenschaften:

  • Hochglänzende HD-Vinylfolie, leuchtendes, exotisches Sport-Cyan mit dem charakteristischen Porsche-PTS-Erbe
  • Hochwertige polymere Hybridfolie mit Luftentlüftungskanälen
  • Lösungsmittelbasierter Acrylkleber von Henkel, transparent, extrem witterungsbeständig, ablösbar
  • Hochwertige PET-Trennfolie für eine glatte Oberfläche und Schutz des Klebstoffs
  • Anpassungsfähig an Rundungen, Spiegel und vertiefte Karosserieteile
  • Sicher ablösbarer Klebstoff, schützt den darunterliegenden Werkslack

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.11 mm
  • Total Thickness (with liner): 0.28 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.