SKU: CG47-HD-5M

غلاف فينيل عتيق الرمادي (CG47-HD)

(3)
سعر منتظم Dhs. 858.00
شحن محسوبة عند الخروج.

وصف

Teckwrap Vintage Gray هو لف المطابقة والقدرة على التكيف ، مرنة لجميع المناسبات. إنه اللون المناسب للموثوقة دائمًا.

يوفر TeckWrap ألوان Gloss HD جديدة تمنح سيارتك لمسة صلبة ولامعة. سلسة واحدة دون أي قشر برتقالي. المواد قابلة للتمديد ، ولف كل حافة ومساحة مريحة بسرعة. والمواد اللاصقة آمنة دون أن تمنحك أي مشكلة عند إلغاء التثبيت. يحتوي الفيلم على طبقة واقية للحيوانات الأليفة ، والتي تساعد على تجنب الخدوش أثناء التثبيت (يجب تقشيرها قبل التدفئة) ، وبطانة بلاستيكية تجعل سطح الفيلم أكثر لامعة وعكس.

تحديد

رانه سمك الفيلم (أم): 110
سمك بطانة الإطلاق (UM): 142
نوع الفيلم: فيلم بوليمري عالي الجودة مع إصدار الهواء

لاصق: لاصق أكريليك قائم على المذيبات Henkel ، مقاوم للحيوية ، اللزوجة 1000 ~ 3000cps ، سمك 12 ميكرون جاف
refire liner: بطانة بلاستيكية
فترة التخزين: عامين إذا تم تخزينه في +10 درجة مئوية إلى +20 درجة ، الرطوبة النسبية 50 ٪ ، في الحزمة الأصلية ، بعيدًا عن أشعة الشمس المباشرة ، في مكان نظيف وجاف. هام: يجب إزالة الطبقة الواقية العلوية قبل التثبيت ، ويجب تخزين الفيلم بدون طبقة واقية لمنع "النفق".
المتانة/الضمان: ورقة البيانات (انقر على الرابط)

قوة الافراج (N/25mm): Standart: 0.10-0.30 ، النتيجة: 0،18 (23 ℃ ، 54 ٪ H)

تاك الأولي (g/25mm): طريقة الاختبار: GB31125-2014: Standart 800-1500 ، النتيجة: 1015 (23℃,54%H)

180 درجة قشر قوة (N/25mm): طريقة الاختبار: GB/T2792-1998: Standart ≥4.9 ، النتيجة: 8،1 (23℃,54%H)

قوة التصاق: طريقة الاختبار: GB/T4851-1998 ، Standart ≥60 ، النتيجة 70 (بدون تحول)

    الشيخوخة (65 ℃ ، سبعة أيام): Standart -إطلاق درجات الحرارة العالية بدون بقايا لاصقة ، النتيجة: لا توجد بقايا لاصقة

    الشيخوخة (-65 ℃ ، عشرة أيام): Standart - منخفضإطلاق درجات الحرارة بدون بقايا لاصقة ، النتيجة: لا توجد بقايا لاصقة

    طَرد:  عرض لفة 152 سم وطول 18 أو 23 مترًا

    تثبيت النصائح:

    التطبيق: من +16 درجة إلى +18 درجة ، الاستخدام من -30 درجة إلى +45 درجة °
    الأدوات: ممسحة قياسية مع مخزن مؤقت ناعم
    التوافق: سطح منحني ناعم ومتوسط
    الاتجاه: لا
    عرض تداخل: 3-4mm

    بعد التسخين: 95 Celcius 

    يجب تقشير الغطاء الواقي قبل التثبيت.

    ملاحظة مهمة: صور الشاشة والألوان والتشطيبات تقريبية. للحصول على تمثيل دقيق للمنتج ، تحقق دائمًا من حامل اللون. يجب استخدام لفات من نفس رقم الكثير من الإنتاج لاستكمال وظيفة التفاف ، حيث قد يحدث تباين ضئيل من اللون. قد يخدش الفيلم أثناء التطبيق أو يوم واحد للاستخدام. الضمان لا يغطي خدش الفيلم.

    Features

    Film construction

    • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
    • Film thickness: 110 µm
    • Liner thickness: 142 µm plastic (HD high-gloss)
    • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
    • Top layer: PET protective layer (peel before heating)
    • Roll width: 5ft (1,52m)
    • Full roll length: 59ft (18 m)

    Performance

    • Service temperature: -35°C to +35°C
    • Release force: 0.18 N/25mm (standard 0.10–0.30)
    • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
    • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
    • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
    • Aging tested: -65°C to +65°C, no residue
    • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

    Warranty

    • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

    Application

    • Application temperature: +17°C to +23°C
    • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
    • Conformability: smooth and medium-curved surfaces
    • Post-heat: 95–100°C (gloss finish)
    • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
    • Overlap: 3–4 mm
    • Non-directional film
    • Avoid overstretching during application
    • Remove the protective cap before installing
    • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

    Disclaimer

    All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


    TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
    Warranty does not cover normal wear, transportation, labor, or consequential damages.
    Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.