油漆保护膜blkm-x.velar

Film construction

• Film type: Matte black color paint protection film with TPU base
• Total thickness: 274 ± 10 µm
• Application layer thickness: 199 ± 8 µm
• Adhesive peel/tack: ~1500 g/inch
• Coating type: Lotus Effect hydrophobic top coat
• Finish: Matte black, opaque
• Roll size: 1.52 m × 15 m

Performance

• Tensile strength: 18 ± 5 MPa
• Product elongation at break: ≥350%
• Coating elongation at break: ≥100%
• Light transmission: ≤0.3% (deep matte opacity)
• UV resistance: ≥99%
• Maximum temperature: 130°C
• Self-healing surface (minor scratches recover with heat)

Warranty

4-year TeckWrap limited warranty against yellowing, cracking, peeling, and material defects. Improper installation, physical impact damage, and scratches beyond the self-healing range are not covered.

• Apply at +17°C to +23°C
• Service range: -40°C to +130°C
• Wet application with slip and tack solutions
• Tools: squeegee with soft buffer, heat gun, knife, microfiber cloth
• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
• Post-heat: activate adhesive after positioning
• Cure: 24–48 hours for full adhesion
• Matte finish requires extra care during cleaning, use matte-safe cleaners only
• Avoid waxing or pressure-washing for the first 7 days
• Surface must be thoroughly cleaned and decontaminated before install

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, physical impact damage, or scratches beyond the self-healing range.

Sample meters are for wrapping businesses only to test professional-grade material, limited to one sample per customer. Screen images may vary, refer to physical samples. Use same production LOT for consistency across panels.