Sku: CG43-HD-18M

高光百叶窗黄乙烯基贴膜 (CG43-HD)

(2)
正常价格 ¥4,330.00
船运 在结帐时计算。

描述

鲜黄色在光线变化时,往往会显得过于刺眼,甚至呈现荧光效果,或带有一丝绿色调。TeckWrap的“百叶窗黄”则能保持其纯净的柠檬漆色调,以及欧洲跑车车漆特有的锐利光泽。  

主要特性

  • 任何光线下皆如一:无论行驶中还是光线变化时,都能保持鲜艳的黄色调,不会偏向绿色或荧光色。 
  • 高光泽度与通透感:聚合物多层混合薄膜打造出光滑、如漆面般的表面,呈现出清晰锐利的反射效果。 
  • 可干净剥离的粘合剂:汉高(Henkel)溶剂型丙烯酸粘合剂剥离后不留残留物,且能抵御雨水、高温和紫外线照射。  
  • 无气泡安装:排气通道将困住的空气向外排出,帮助贴膜平整地贴合在面板上。
  • 热塑性薄膜:可包裹镜面、边缘及中等深度的凹陷面板,角落处不会翘起。

TeckWrap的“卢浮宫黄”呈现出刚喷涂的柠檬色漆面效果,而非过度饱和的改装黄。其光泽度使反射效果清晰锐利,而色彩在不同视角下均能保持纯净明亮的特性。在阴天或阴影下,色调仍保持柠檬色基调,不会偏向绿色。若将其与荧光黄并列,差异便一目了然。这种色调看起来就像原厂漆,却不会显得刺眼。   

原厂色匹配

  • 最接近法拉利Giallo Modena(488、F8 Tributo)。 
  • 饱和度与保时捷赛车黄相同。
  • 比兰博基尼“特内里费黄”(Giallo Tenerife)更浅。
  • 比科尔维特竞赛黄更明亮。 
  • 比雷诺运动版“液态黄”(Mégane RS)更具运动感。 

此类原厂车漆通常仅限于最知名的高性能车型。TeckWrap的高光百叶窗黄车膜,让任何运动型轿跑、轿车或SUV都能拥有同样鲜明的黄色涂装。

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.