Sku: SL01-HD-5M

光面金属樱花粉色车身贴膜 (SL01-HD)

(27)
正常价格 ¥1,577.00
船运 在结帐时计算。

描述

柔和的粉色涂装往往会显得过于低调,或者偏向于泡泡糖粉色。TeckWrap 亮光金属樱花粉则能保持色彩的纯净与平衡,增添一抹柔和的金属光泽,从日出到日落都给人以清新亮丽的感觉。 

主要特点

  • 受花朵启发的色彩:精致的樱花粉搭配细腻的金属光泽,营造出清爽的光泽质感,既显精致又不显甜腻。 
  • 持久通透的光泽:Renolit 聚合物混合薄膜能均匀分布金属颜料,确保每个面板上的反光都平滑细腻。 
  • 无气泡施工:排气通道在安装过程中将困住的空气导出,帮助薄膜平整贴合,形成干净均匀的表面。 
  • 耐候性强:汉高溶剂型丙烯酸粘合剂在天气变化中仍保持透明,且可干净剥离,不留残留物。 
  • 专为曲面设计:可包裹镜面、保险杠、车门把手及中等程度的凹陷面板,同时确保每个表面的光泽度均匀一致。  

樱花粉更接近腮红粉,而非泡泡糖粉。在阴天光线下,它呈现出柔和温暖的色调,几乎带有一丝灰调。阳光直射时,会散发出淡淡的光晕,而非刺眼的光泽。大多数柔和色调的贴膜在阴影下会褪色呈灰,或在烈日下显得不自然。樱花粉在两种光照条件下都能保持一致的色调,其效果更接近化妆品腮红的质感,而非典型的乙烯基粉色。 

原厂色匹配

  • 最接近日产樱花粉。
  • 比保时捷“冰冻浆果金属色”更柔和。 
  • 比宝马玫瑰石英金属色更浅。 
  • 比菲亚特“春之玫瑰”更纯净 

若柔和的原厂粉色一直令您心动,那么“樱花粉”将把这种清新色调带入全尺寸SUV、轿车,或是仅用于引擎盖和车顶的点缀之中。 

Features

Film Construction

  • Film Type: Pressure-sensitive premium polymeric hybrid (Renolit) with air-release channels
  • Film Thickness: 0.14 mm
  • Release Liner Thickness: 0.03 mm
  • Backing Liner Thickness: 0.14 mm
  • Total Thickness (with liner): 0.31 mm
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Gloss, directional
  • Roll Width: 152 cm (5 ft)
  • Full Roll Length: 18 m (59 ft)
  • Roll Weight: 13 kg

Performance

  • Surface gloss (CD): 14.5% (ASTM D523-99, 60° angle)
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 3 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

Application

  • Apply at +17°C to +18°C
  • Service range: -45°C to +45°C
  • Standard squeegee with soft buffer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs (48 hrs recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Remove protective cap before install

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.