高光金属钻白车身贴膜 (CK801-HD)

Film Construction

• Film Type: Premium-grade polymeric multilayered hybrid with air-release channels
• Film Thickness: 0.14 mm
• Release Liner Thickness: 0.03 mm
• Backing Liner Thickness: 0.13 mm
• Total Thickness (with liner): 0.30 mm
• Liner: Felix Schoeller double-side PE-coated Kraft (ISO 9001, ISO 14001, OHSAS 18001)
• Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
• Finish: Gloss with diamond sparkle, directional
• Roll Width: 152 cm (5 ft)
• Full Roll Length: 18 m (59 ft)
• Roll Weight: 14 kg

Performance

• Breaking strength: 23.7 N/10mm (ASTM D3759/D3759M-05)
• Peel strength: 6.4 N/10mm (ASTM D3330/D3330-04)
• Dimensional stability: shrinkage less than 2%
• Plastification: 28%–38%
• UV resistance: 3–4 Pass (ASTM D4329-13 Cycle A, ISO 105-A02)
• UV test conditions: UVA-340, 0.89 W/(m²·nm), 60°C UV + 50°C condensation, 44h
• Storage: 2 years at +10°C to +20°C, 50% RH, original packaging, dry

Warranty

Standard TeckWrap limited warranty. Scratches not covered. Use same production LOT for color consistency across panels.

• Apply at +17°C to +18°C
• Service range: -45°C to +45°C
• Standard squeegee
• Conformability: smooth and medium-curved surfaces
• Post-heat: 90°C
• Cure: 24 hrs (48 hrs recommended)
• Overlap: 3–4 mm
• Directional film — check orientation before cutting
• Remove protective cap before install

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary — refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.