Sku: CG03-HD-18M

亚马逊灰色(CG03-HD)乙烯基包裹

(1)
销售价格 ¥2,758.00 正常价格 ¥4,140.00
船运 在结帐时计算。

描述

通过我们的亚马逊灰色乙烯基包装,实现低调的精致。无论您是想在车辆上增加现代边缘还是完成光滑的室内设计项目,此乙烯基包装盒每次都能提供完美无瑕的高清饰面。

Teckwrap提供了新的光泽高清颜色,可为您的车辆具有固体,闪亮的饰面 - 一种光滑的,没有任何橙皮。该材料可拉伸,快速包裹每个边缘和凹入区域。粘合剂是安全的,卸载时不会造成任何麻烦。这部电影具有宠物保护层,有助于避免在安装过程中刮擦(在加热之前应将其剥落)。塑料衬里使膜的表面更加光泽和反射。 

规格

薄膜厚度: 110 µm

释放衬里厚度: 142 µm

电影类型:带有空气发行的高级聚合物的胶片。

粘合剂: 汉克尔溶剂的丙烯酸粘合剂,耐候性和可靠。

释放衬里: 塑料衬里,可光泽和反射表面。

耐用性/保修: 请参考 数据表以获取详细信息.

测试结果:

释放力(N/25mm):标准:0.10-0.30 |结果:0.18(23°C,54%H)

初始大头钉(g/25mm):标准:800-1500 |结果:1020(23°C,54%H)

180°果皮强度(N/25mm):标准:≥4.9|结果:8.3(23°C,54%H)

粘附强度:标准:≥60|结果:72(没有转移)。

安装提示:

温度范围:应用: +16°C至 +18°C |用法:-30°C至 +45°C。

需要的工具:带软缓冲区的标准挤压。

合格性:平滑和中曲面的表面。

加热后:95°C可获得最佳效果。

重叠宽度:3-4毫米。

方向:不。

保护层:安装前剥落。

重要说明: 

检查颜色色板以准确表示亚马逊灰色。

使用来自同一生产地段的卷来保持一致的颜色。

Amazon Gray CG0Vinyl Wrap为您的项目增添了现代优雅感。立即下订单,体验风格和性能的完美融合!

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.