Sku: RB28-HD-5M

亮光金属镍色乙烯基贴膜 (RB28-HD)

(1)
正常价格 ¥1,577.00
船运 在结帐时计算。

描述

TeckWrap“亮彩镍”色专为追求精致品味的您打造。它外观低调内敛,却透着奢华气息。如果您想要一款简约而经典的配色,千万不要错过这款。

我们的“亮光金属”车身贴膜表面光滑、光泽度高,采用高品质多层聚合物压延乙烯基薄膜制成,并配有排气槽。“亮光金属”车身贴膜经久耐用且贴合性极佳;其延展性足以快速包裹车辆的每个边缘和凹陷部位。 高光金属膜还采用了安全的溶剂型聚丙烯酸酯粘合剂,安装简便,且对车漆温和无害。 

规格

采用具有稳定色料的聚合物材料,贴合性佳。适用于整车贴膜(或任何其他光滑或曲面)。

  • 膜材厚度:0.14 毫米
  • 背衬纸厚度:0.14 毫米
  • 离型纸厚度:0.03 毫米
  • 总厚度(含衬纸):0.31 毫米

注:SKU(产品代码)中含有“HD”字样的产品采用塑料离型纸(高光膜)

  • 薄膜类型:带排气通道的高档聚合物多层混合乙烯基薄膜
  • 宽度和长度:标准卷尺寸——1.52 米×18(59.8 英寸×708.6 英寸,4.98 英尺×59 英尺,1.66 码×19.6 码)

粘合剂与离型纸

  • 粘合剂:汉高(Henkel)溶剂型丙烯酸粘合剂,透明,超强耐候性,粘度1000~3000cps,干膜厚度12微米

储存

  • 储存期限(保质期):若在+10°C至+20°C、相对湿度50%的环境下,置于原包装中,避免阳光直射,存放于清洁干燥处,则保质期为2年

性能

  • 耐久性/保修:技术数据表(点击链接)
  • 应用温度:+17°C 至 +18°C,使用温度范围:-45°C 至 +45°C
  • 剥离力(N/25mm):标准:0.10-0.30,结果:0.17(23℃,54%H)
  • 初始粘性(g/25mm):测试方法:GB31125-2014,标准值 800-1500,测试结果:840(23℃,54%H)
  • 180°剥离强度(N/25mm):测试方法:GB/T2792-1998,标准值 ≥6.8,测试结果:8.7(23℃,54%H)
  • 附着力:测试方法:GB/T4851-1998,标准值 ≥60,结果:70(无移位)
  • 老化(65℃,7天):标准——高温剥离后无胶痕,结果:无胶痕
  • 老化试验(-65℃,10天):标准要求——低温剥离后无胶痕,结果:无胶痕
  • 推荐施工工具:刮刀、抛光轮、美纹纸、热风枪、磁铁、手套、红外线测温仪、红外线加热器
  • 施工方法:适用于压延薄膜的标准方法。避免过度拉伸。需进行后加热
  • 后加热温度:90°C
  • 固化时间:10°C以上环境下需24小时
  • 后期保养:中性pH值。避免接触蜡或溶剂
  • 方向性:

工具:带缓冲垫的软刮刀

安装前应撕下保护膜。

重要提示:屏幕上的图像、颜色和表面效果仅供参考。如需准确了解产品外观,请务必查阅色卡。完成包膜作业时,应使用同一生产批次(LOT编号)的卷材,因为不同批次之间可能会出现轻微的色差。薄膜在施工过程中或日常使用中可能会出现划痕。保修范围不包括薄膜的划痕。

Features

Film construction

  • Film type: premium-grade polymeric multilayered hybrid vinyl with air-release channels
  • Film thickness: 122 μm
  • Release liner thickness: 142 μm plastic
  • Series: 190 Series
  • Roll size: 1.52 m × 18 m (59.8" × 708.6")
  • Material: conformable polymeric vinyl with stable color pigments
  • Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000 to 3000 cps viscosity, 12 μm dry thickness

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.17 N/25mm (standard 0.10 to 0.30)
  • Initial tack: 840 g/25mm (standard 800 to 1500)
  • Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
  • Adhesion strength: 70 (standard ≥ 60, no shifting)
  • High temperature aging (65°C, 7 days): no adhesive residue
  • Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove protective cap before install
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.