Sku: C15-2mil-5M

陶瓷窗户电影TWF-C15窗户电影

正常价格 ¥754.00
船运 在结帐时计算。

描述

通过Teckwrap陶瓷窗膜TWF-C15提升您的驾驶体验,旨在提供无与伦比的性能,样式和保护。无论您是与炎热的热量,有害的紫外线或不必要的眩光作斗争,我们的陶瓷窗膜都经过精心设计,可以将您的车辆转变为更酷,更安全,更时尚的避难所。

为什么选择陶瓷窗胶片TWF-C15?
纳米 - 陶瓷技术:非金属,非反射和超耐用 - 确保零信号干扰(GPS,移动),同时拒绝热量和紫外线。
总太阳能排斥(TSER):最多可阻止太阳热量的65%(Zenith30),使机舱冷却器保持冷却器并减少AC应变。
≥99%的紫外线保护:屏蔽皮肤并防止内部褪色,破裂或变色。
眩光还原:低内部/外部反射率(低至0.06)可最大程度地减少眼睛应变,以使驾驶更安全。
定制解决方案:针对每种需求的三个量身定制选项 - 前挡风玻璃清晰度,侧窗隐私和时尚的美学。



 

窗户电影

 

 

姓名 TWF-C15
尺寸 1.52*30m
厚度 200万
材料 纳米陶瓷
申请 侧窗盾
VLT(%)
可见的光传输
13%
VLR(%)
内部可见光反射率
6%
VLR(%)
外部可见光反射率
6%
ir(%)
红外传输
11%
UVC(%)
紫外线被拒绝
≥99%
TSER(%)
总太阳能被拒绝
65%


为卓越而设计
陶瓷窗膜具有2Mil的厚度和1.52*30m尺寸,可轻松安装和持久的耐用性。纳米陶瓷材料可确保抗刮擦性并随着时间的流逝而保持清晰度,即使在苛刻的阳光下,您的投资将持续下去。

驾驶冷却器,更安全,更聪明
使用陶瓷窗胶片改造您的汽车,最先进的技术符合优雅的设计。保护您的乘客,保留车辆的内部,并以完美的饰面旋转头部,散发出精致和风格。不要错过增强您的驾驶体验的机会。立即订购,并感受到teckwrap陶瓷窗帘的好处。

Features

Film construction

  • Film type: Nano-ceramic automotive window tint film, dark tint
  • Thickness: 2 mil
  • Application: Side windows and rear windshield (subject to local laws)
  • Directional: Yes
  • Roll size: 1.52 m × 30 m
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Optical performance

  • Visible Light Transmission (VLT): 13%
  • Internal Visible Light Reflectance (VLR): 6%
  • External Visible Light Reflectance (VLR): 6%
  • Infrared Transmittance (IR): 11% (89% rejection)
  • UV Rejection (UVC): ≥99%
  • Total Solar Energy Rejected (TSER): 65%

Durability

  • 2 mil thickness adds shatter protection
  • Nano-ceramic construction resists scratches under harsh sunlight
  • Dimensionally stable across temperature variations
  • Long-term color stability and clarity
  • Signal-friendly construction (no GPS, cell, or radio interference)

Warranty

Standard TeckWrap limited warranty against bubbling, peeling, cracking, and color fading. Improper installation, scratches from cleaning with abrasive tools, and physical impact damage are not covered.

Application

  • Professional installation strongly recommended
  • Apply at +17°C to +23°C, dust-free environment essential
  • Service temperature range: -45°C to +45°C
  • Wet application with slip and tack solutions
  • Recommended tools: squeegee, soft buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Post-heat not required for standard application
  • Maintain 3–4 mm overlap for seamless coverage
  • Directional film, check orientation before cutting
  • Peel protective cap before installation
  • Allow 7–14 days for full cure before rolling windows down
  • Avoid cleaning the film for 7 days after install
  • After cure, clean with ammonia-free glass cleaner and soft microfiber only
  • Verify local window tint laws before installation, 13% VLT is restricted for front windows in most regions

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, scratches from abrasive cleaning, or physical impact damage.

Local laws regarding automotive window tint vary significantly by region and may restrict VLT percentages on certain windows. 13% VLT is darker than most regions permit for front side windows and windshields. Buyer is responsible for ensuring legal compliance. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency across windows. Scratches during installation or daily use are not covered.