珊瑚桃（RB08-HD）乙烯基包裹

Film construction

• Film type: Premium aliphatic TPU color paint protection film
• Top coat: Fluorocarbon polyurethane (hydrophobic, anti-yellowing, chemical resistant)
• Total thickness: 344 µm
• Application layer thickness: 194 µm
• Adhesive: Low-tack acrylic PSA, repositionable during install
• Adhesive peel/tack: 1350 g/inch
• Liner: Ultra-micro-grooved PET with air-release channels
• Finish: Gloss color PPF, Noble Green, opaque
• Light transmission: 0%
• Roll size: 1.52 m × 18 m

Performance

• Tensile strength: 22 MPa
• Product elongation at break: 360–430%
• Self-healing surface (minor scratches recover with heat)
• UV-induced color stability
• Resistant to stone chips, road grime, light abrasions, and chemical contamination
• Dimensionally stable across temperature variations

Warranty

5-year TeckWrap limited warranty against yellowing, cracking, peeling, delamination, and material defects. Improper installation, physical impact damage, and scratches beyond the self-healing range are not covered.

• Apply at +17°C to +23°C
• Service range: -40°C to +100°C
• Dry-install system, no wet solution required (air-release channels handle film placement)
• Tools: squeegee with soft buffer, heat gun, knife, microfiber cloth
• Repositionable during installation thanks to low-tack PSA
• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
• Post-heat: activate adhesive after final positioning
• Cure: 24–48 hours for full adhesion
• Use same production batch for full vehicle, label and store leftovers by batch code
• Avoid waxing or pressure-washing for the first 7 days
• Surface must be thoroughly cleaned and decontaminated before install

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, physical impact damage, or scratches beyond the self-healing range.

As with all premium color PPF, slight variations in hue or gloss may occur between production batches. Use the same batch for a complete vehicle and order enough material from one batch for the full job. Screen images may vary, refer to physical samples. Use same production LOT for consistency across panels.