Sku: SMT03-5M

威尼斯紫罗兰色(SMT03)乙烯基包裹

(8)
正常价格 ¥1,443.00
船运 在结帐时计算。

描述

teckwrap venetian紫罗兰色是温柔而精致的。这是温柔的包裹。立即改变以享受令人愉悦的体验。

规格

综合且可靠的Renolit聚合物材料。适用于完整的汽车包裹(或任何其他光滑或弯曲的表面)。

电影的厚度 0.12mm
带有释放衬里的膜的厚度: 0.28mm

电影类型: 带有空气释放通道的高度高度高度聚合乙烯基薄膜 

粘合剂: 汉克尔溶剂基丙烯酸粘合剂,透明,耐超杀剂,粘度1000〜3000cps,厚度为12μm干燥
释放衬里: Felix Schoeller释放衬里 / 20-104-20-1,9印刷,双侧PE涂层牛皮。一侧无溶剂涂有硅树脂的空气释放(ISO 9001,ISO 140001,OHSAS 18001)
存储期: 3年,如果以 +10°至 +20°储存,以达到最佳质量,相对湿度为50%,原始包装,远离阳光直射,干净干燥的地方
耐用性/保修: 数据表 (单击链接)
加热后:65 Celcius

伸长/休息 MD:206.8 / CD:196.4(测试方法:ASTM D882-02)

抗拉强度: MD:29.5/CD:24.8 N/mm2-速度200mm/min(测试方法:ASTM D882-02)

维度稳定性: 2% - 烤箱/10'*70C(MD)(测试方法:ASTM D1204-02)

表面张力: 34 Dynes/cm(测试方法:ASTM D2578-04A,生产后24小时)

包裹:  卷宽152厘米,长度18 m,重量13公斤

安装提示:

温度:从 +17°-18°„,用法从-45°到 +45°
工具:柔软(湿)缓冲液的标准挤压器
合格性:光滑和中曲面
方向:是的
重叠宽度:3-4mm

重要说明: 屏幕的图像,颜色和饰面是近似的。对于产品的真实表示形式,请务必检查颜色色板。相同生产批号的滚动应用于完成包装作业,因为可能会发生少量的颜色变化。这部电影可能在申请书中或一天的使用中刮擦。保修不涵盖电影的刮擦。

Features

Film construction

  • Film type: Pressure-sensitive high-grade polymeric with air-release channels
  • Film thickness: 0.12 mm (120 µm)
  • Total thickness with liner: 0.28 mm
  • Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin metallic, directional
  • Roll width: 5 ft (1,52 m)
  • Full roll length: 59ft (18m)

Performance

  • Service range: -30°C to +30°C
  • Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
  • Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
  • Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
  • Surface tension: 34 dynes/cm (ASTM D2578-04a)
  • Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 85°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Directional film, check orientation before cutting
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid waxes and harsh solvents

Disclaimer

  • All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
  • TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
  • Warranty does not cover normal wear, transportation, labor, or consequential damages.
  • Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.