Sku: W15-3.5mil-5M

AEGIS双银W15-350万车窗彩色薄膜

正常价格 ¥2,684.00
船运 在结帐时计算。

描述

Teckwrap Aegis15 Window胶片,命令隐私和无与伦比的太阳防御,这是AEGIS系列中最黑暗的侧窗胶片。利用磁控管溅射精度,这部350万电影具有以下方式:

15%可见光传输(VLT): 深黑色的色调,以完全隐私 时尚的风格。
70%的总太阳能排斥(TSER): 该系列中最高的热障碍能力。
99%的紫外线保护: 保持内饰无淡入淡出,居住者安全。
0.06%的反射率: 消除了眩光的分心。
Featherlight 350万个人资料: 耐用但易于安装。

为什么AEGIS15脱颖而出?
粗体保护: 磁铁溅射可以使极端的黑暗不损害热排斥或耐用性。
隐形效率: 拒绝70%的太阳能 - 在城市通勤或阳光普照的高速公路上完美。
没有妥协: 在提供最大的隐私和紫外线防御的同时,保持工厂平滑的效果。

 

 

窗户电影

 

姓名 W15-3.50万
尺寸  1.52*15m
厚度 350万
材料 磁控溅射(深色)
申请 侧窗盾(黑色)
VLT(%)
可见的光传输
15±2%
VLR(%)
内部可见光反射率
6%
VLR(%)
外部可见光反射率
6%
ir(%)
红外传输
15±2%
UVC(%)
紫外线被拒绝
≥99%
TSER(%)
总太阳能被拒绝
70±2%

 

理想的: 优先考虑大胆美学的驱动程序,最大的热排斥和 谨慎s。 
拥有“ teckwrap aegis15”,这是提供隐秘和舒适的窗户电影。

Features

Film construction

  • Film type: Magnetron sputtering automotive window tint film (deep dark tint)
  • Thickness: 3.5 mil (ASTM D882-02)
  • Application: Side windows and rear windshield (subject to local laws)
  • Directional: Yes
  • Storage shelf life: 3 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight

Optical performance

  • Visible Light Transmission (VLT): 15 ± 2% (ASTM D1003)
  • Internal Visible Light Reflectance (VLR): 6% (ASTM D1003)
  • External Visible Light Reflectance (VLR): 6% (ASTM D1003)
  • Infrared Transmittance (IR): 15 ± 2% (85% rejection, ASTM D1003)
  • UV Rejection (UVC): ≥99% (ASTM D1003)
  • Total Solar Energy Rejected (TSER): 70 ± 2% (ASTM D1003)

Durability

  • 3.5 mil thickness adds extra scratch resistance
  • Dimensionally stable across temperature variations
  • Long-term color stability and clarity
  • Magnetron sputtering construction for distortion-free optics

Warranty

Standard TeckWrap limited warranty against bubbling, peeling, cracking, and color fading. Improper installation, scratches from cleaning with abrasive tools, and physical impact damage are not covered.

Application

  • Professional installation strongly recommended
  • Apply at +17°C to +23°C, dust-free environment essential
  • Service temperature range: -45°C to +45°C
  • Post-heat at 65°C for optimal adhesion
  • Wet application with slip and tack solutions
  • Recommended tools: squeegee, soft buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Maintain 3–4 mm overlap for seamless coverage
  • Directional film, check orientation before cutting
  • Allow 7–14 days for full cure before rolling windows down
  • Avoid cleaning the film for 7 days after install
  • After cure, clean with ammonia-free glass cleaner and soft microfiber only
  • Verify local window tint laws before installation, 15% VLT is restricted for front windows in most regions

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, scratches from abrasive cleaning, or physical impact damage.

Local laws regarding automotive window tint vary significantly by region and may restrict VLT percentages on certain windows. 15% VLT is darker than most regions permit for front side windows and windshields. Buyer is responsible for ensuring legal compliance. Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency across windows. Scratches during installation or daily use are not covered.