Home / Collections / All / Rainbow Drift Metallic

Rainbow Drift Metallic

$759.00 $875.00 saving $116.00
Rainbow Drift Metallic

Rainbow Drift Metallic

SKU: RD01G
description

Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes with 5 glossy or 5 matte colors.


Thickness of film (C=10 micron): 14C±0.5C (matte), 16C±0.5C (glossy)
Thickness of film with release liner: 32C±0.5C
Type of film: High grade polymeric multilayered calendared vinyl film with air release channels
Colors: Winered Nebula, Ibiza Sunset, Iris Purple Gem, Peacock Green, Northern Aurora
Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)
Series: 190 series
Adhesive: Solvent polyacrylate
Adhesive performance properties: (1mil adhesive on 1mil material, bounded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch
Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating
Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place
Avg. indoor life: 4 years when followed rules of application and usage
Avg. outdoor life: 3 years when followed rules of application and use
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 3%(matte), 4% (glossy)
Plastification: between 27%-35%
Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)
Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5
Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching. Post heating
Post-heating temperature: 110℃ flat surfaces, 130℃ curves and overlaps
Cure time: 24 hours above 10℃
Aftercare: PH neutral, Avoid wax or solvents
The images, colors and finishes on screen are approximate. For the real representation of the product always check the color swatch.

Share with your friends