Available sizes: 0.3m, 3m, 5m, 10m, 18m
Semi-conformable PVC material with silver coating. Suitable for full car wrapping on smooth or medium curved surfaces. Concave and convex surfaces with difficult angles should be wrapped in pieces with 3-5mm overlaps. Comes with a selection of 11 reflective colors to create the distinctive appearance and improve a car's aesthetics.
Application: vehicle and motorcycle graphics, vehicle personalization
The thickness of film: 0,11mm
The thickness of film with release liner: 0,29mm
Type of film: Hybrid vinyl film (silver coating) with air release channels
Series: 180 series
Adhesive: Henkel solvent based low initial tack adhesive
Release liner: White silicone-coated paper with a double-sided polyethylene coating
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 4 years when followed rules of application and use
Outdoor life: 1-2 years when followed rules of application and use. Durability depends on surface and climate.
Application temperature: from +17°С to +25°С, usage from -30°С to +30°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Package: Roll width 152 cm, length 18 m, weight 13 kg
Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during application, or during a day in and out use. Scratching of the film is not covered by warranty.
Сaution: Before purchasing and using, a customer shall determine the suitability of the product for its intended use. One should have high installation skills in wrapping of chrome and metalized films. If you don't have proper experience we suggest choosing another finish. Current film has limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Chrome films (CHMxxE, HCHxxG, MCHxx) can leave up to 30% adhesive residue. We recommend not heat film during uninstall. Please refer to TeckWrap Installation Guide for additional information.