Home / Collections / All / Gloss Aluminium

Gloss Aluminium

$110.00
Gloss Aluminium

Gloss Aluminium

SKU: GAL01
description

Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 12 gloss colors. We recommend steam vacuum or IRR heater for installation.

Thickness of film: 0.15mm

Thickness of film with release liner: 0.29mm

Type of film: High grade polymeric multilayered calendared vinyl film with silver back coating and air release channels

Colors: GAL01 True Blood, GAL02 Blue gem, GAL03 Candy purple, GAL04 Deep pink, GAL05 Mermaid green, GAL06 Paprika orange, GAL07 Leaf green, GAL08 Amber gold, GAL10 Storm Gray, GAL11 Silver mist, GAL12 Yellow green, GAL13 Olympic blue

Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)

Series: 190 series

Adhesive: Solvent polyacrylate

Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel)

180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch

Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating

Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Avg. indoor life: 4 years when followed rules of application and usage

Avg. outdoor life: 3 years when followed rules of application and use

Application: from +17°С to +25°С, usage from -55°С to +65°С

Dimensional stability: shrinkage less than 3%(matte), 4% (glossy)

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005,

Test result: 5

Exposure cycle: ASTM D4329-13 cycle A

Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application method: Standard methods for calendered films. No overstretching. Post heating

Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps

Cure time: 24 hours above 15℃

Aftercare: PH neutral, Avoid hot wax or solvents

The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.

 

Customer Reviews

Based on 1 review Write a review

Share with your friends