Cobalt Ocean (MCH09) Chrome Wrap

$119.00


Description

With a collection of five stunning colors, TeckWrap offers you this series of neo-chrome vinyl wraps, which gives your vehicle a gorgeous-looking finish, a perfect choice for partial wrapping. As a proud supplier, TeckWrap has plenty of film selections with good conformability and durability.

Medium flexible chrome for decals and signs.

Specifications

The thickness of the film: 0.11mm
The thickness of film with release liner: 0.27mm
Type of film: PET film with new air release channels 

Series: 180 series 

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Durability/Warranty: Datasheet (Click the link)
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Package: Roll width 122 cm, length 18 m, weight 13 kg

Available sizes: 3m, 5m. 10m, 15m, 18m

Disclaimer

Designed for partial wrapping ONLY!

Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, or too strong heating. The film may scratch during the application or a day in and out. The warranty does not cover the scratching of the film.

Сaution:  Before purchasing and using, a customer shall determine the product's suitability for its intended use and should have experience wrapping metalized films. The current film has a limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Chrome films (CHMxxE, HCHxxG, MCHxx) can leave up to 30% adhesive residue. We recommend not heating the film during uninstallation. Please refer to the TeckWrap Installation Guide for additional information. 

Customer Reviews

Based on 3 reviews Write a review

Attention

Spliced rolls may be shipped from U.S. and overseas warehouses if full 59ft rolls are unavailable. An additional 2 yards of material is added to offset any potential loss in such cases. The product has an information sticker, and spliced rolls are marked with a sticky tab. All spliced rolls are authentic (of the same batch and color), defect-free, and adhere to strict quality standards.

How Much Wrap Do I Need?

Motorcycles 10-16 feet (3-5 meters)
Mini, small cars 42-45 feet (13-14 meters)
Convertible 49-52 feet (15-16 meters)
Coupe 55-59 feet (17-18 meters)
Sedan 55-59 feet (17-18 meters)
Hatchback 52-55 feet (16-17 meters)
Sports Car 52-55 feet (16-17 meters)
Station Wagon 59-65 feet (18-20 meters)
Sport-utility Vehicle (SUV) 55-63 feet (17-19 meters)
Minivan 65-80 feet (20-24 meters)
Pickup Truck 72-92 feet (22-28 meters)

Keep in mind that you may need extra material for repairs.
Therefore we recommend adding 6-9 feet (2-3 meters) to your measurements to avoid additional shipping expenses.

To achieve a perfect finish

  • We recommend using a tack reducer for flat panels.
  • Installation by at least two people/panel
  • Don't heat up to the line where the film is lifted to prevent adhesive lines.
  • Apply max 50 degrees of heat when stretching to prevent fading and marks.
  • Apply soap and water over the squeegee felt to avoid scratches.
  • Relax the film (heat and let it cool down) before applying it to a recess
  • Apply adhesive promoter on deep recesses
  • Post-heat a vinyl film to a recommended temperature





Delivery terms

The order processing time is 24 hours. We ship on working days (Monday-Friday) and provide tracking numbers within 48 hours from the order time.
The orders are shipped with FedEx, UPS and DHL. The average days to Delivery by Carrier: FedEx International 7-8 days, UPS International 6-8 days, UPS Domestic 2-3 days and DHL 7 days.

For US and Canada customers - Free domestic shipping is available from local warehouses on full 18-meter (59 ft, 19 yds) rolls. Please reach your sales manager for details.

 

Important

The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatches. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.