SKU : CK892G-5M

Enveloppe en vinyle bleu violet brillant (CK892G)

(10)
Prix habituel 2,006.00 dh
Frais de livraison calculés lors du paiement.

Description

Teckwrap Gloss Purple Blue fait un mélange parfait des deux teintes en harmonie, apportant une apparence innovante. C'est excellent pour obtenir une perspective unique. Commandez maintenant et démarrez sur la route.

Teckwrap vous propose cette série d'enveloppements en vinyle métallique caméléon avec une collection de trois couleurs distinctives, ce qui donne à votre véhicule une finition métallique plate. En tant que fier fournisseur, Teckwrap a de nombreuses sélections de films avec une bonne conformité et une bonne durabilité. Le matériau est suffisamment extensible pour envelopper chaque bord et la zone encastrée rapidement. Et l'adhésif est sûr sans vous causer de problème lors de la désinstallation. La meilleure chose est que ces enveloppes en vinyle de Teckwrap sont toutes de haute qualité mais raisonnables et abordables. 

Caractéristiques

Matière polymère multicouche conformée et fiable avec des pigments de couleur stable. Convient pour un enveloppement de voiture complet (ou toute autre surface lisse ou incurvée).

L'épaisseur du film est 0,13 mm
L'épaisseur du film avec une doublure de sortie: 0,30 mm
Type de film: P de haut niveauFilm de vinyle calendré olymère avec canaux de libération d'air

Adhésif: Adhésif acrylique à base de solvant Henkel, transparent, ultra-temps résistant, viscosité 1000 ~ 3000 cps, épaisseur 12 μm à sec
Liner de libération: Felix Schoeller Release liner / 20-104-20-1,9 Imprimé, double par rapport à PE Kraft. Un côté sans solvant sans solvant en silicone, libération d'air (ISO 9001, ISO 140001, OHSAS 18001)
Période de stockage: 2 ans s'il est stocké à + 10 ° C à + 20 ° C pour une qualité optimale, une humidité relative de 50%, dans un ensemble d'origine, loin de la lumière directe du soleil, dans un endroit propre et sec.
Durabilité / garantie: Fiche de données (Cliquez sur le lien)
Stabilité dimensionnelle: retrait de moins de 3%
Plastification: entre 25% -32%
Force de rupture: 28,7 n / 10 mm (moyenne), méthode de test: ASTM D3759 / D3759m


Installez les conseils:

Température: de + 17 ° с à + 25 ° с, utilisation de -55 ° с à + 65 ° с
Outils: raclette standard
Conformabilité: surface lisse et moyenne incurvée
Directionnel: oui
Largeur de chevauchement: 4-5 mm

Emballer:  Largeur de rouleau 152 cm, longueur 18 m, poids 14 kg 

Remarque importante: Les images, les couleurs et les finitions de l'écran sont approximatifs. Pour une représentation précise du produit, vérifiez toujours l'échantillon de couleur. Les rouleaux à partir du même numéro de lot de production doivent être utilisés pour terminer un travail d'enveloppe, car une légère variation de la couleur de lot à lot peut se produire. Le film peut se gratter pendant l'application ou une utilisation de jour en jour. La garantie ne couvre pas le grattage du film.

Features

Film construction

  • Film type: high-grade polymeric calendered vinyl film with air-release channels
  • Film thickness: 0.15 mm
  • Liner thickness: 0.14 mm
  • Total thickness with liner: 0.32 mm
  • Liner: transparent plastic release liner (0.03 mm) with air-release grid pattern
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra weather-resistant, 1000 to 3000 cps viscosity, 12 μm dry
  • Finish: gloss color-shift, flat metal (chameleon), directional
  • Roll width: 1.52 m (5 ft)
  • Roll length: 18 m (59 ft)
  • Roll weight: 14 kg

Performance

  • Service temperature: -35°C to +35°C
  • Dimensional stability: shrinkage less than 3%
  • Plastification: 25% to 32%
  • Breaking strength: 28.7 N/10mm avg (ASTM D3759/D3759M-05)
  • Storage: 2 year shelf life at +10°C to +20°C, 50% relative humidity, in original packaging, away from direct sunlight

Warranty

Built for long-term outdoor use, with up to 3 years of durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Horizontal surfaces such as roofs, hoods, and bonnets take the most sun and weather and carry a shorter expected life. The warranty covers manufacturing defects such as bubbling, cracking, and adhesive failure when the film is properly stored, professionally installed, and maintained per the care guidance. It does not cover abrasion, scratches, gloss change, or normal wear. Heat-removable within 2 years for the cleanest removal, with minimal adhesive residue.

Application

  • Surface: apply only to a clean, sound, fully cured OEM factory finish. Repainted, primed, aftermarket, or damaged surfaces can affect adhesion and removal and fall outside warranty coverage.
  • Apply at +17°C to +23°C
  • Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 100°C
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 4 to 5 mm
  • Directional film. The color-shift effect orients with the film, so keep orientation consistent across all panels and use one production LOT per vehicle to avoid a mismatched shift between panels.
  • Avoid overstretching during application, which can distort the color-shift pigment
  • Remove the protective cap before installing
  • Professional installation strongly recommended for the best result and to keep the warranty valid
  • Aftercare: hand wash with a pH-neutral shampoo (pH 3 to 11). Avoid waxes, solvents, and petroleum-distillate products, and never use automatic washes, brushes, or high-pressure washers.

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages. Coverage requires proper storage, professional installation, and maintenance in line with TeckWrap's care guidance, and does not apply to films installed on non-OEM, repainted, or damaged surfaces. If you notice cracking, lifting, edge failure, or other defects, contact your installer promptly for assessment.

Color-shift films change apparent color with viewing angle, lighting, and surroundings, and the direction of the shift follows the film orientation. This is the defining characteristic of a color-shift film and is not a defect.

Removal from aged, repainted, or poorly bonded factory paint may lift paint or clear coat. TeckWrap is not responsible for the condition of the underlying paint upon removal.

Screen images may vary, refer to physical color swatches. Use the same production LOT for color consistency. Scratches during application or daily use are not covered.