SKU: VCH422-S-18M

Satin Sangria Red Vinyl Wrap (VCH422-S)

(1)
14,938.00 ฿ 22,423.00 ฿
Tax included Shipping calculated at checkout.

Description

Most reds shout. Sangria Red doesn't. It's a deep, blackened wine, ruby where the light lands, near-black in the shadows, with fine metallic sparkle underneath and a satin sheen that pulls it into forged-metal territory, liquid and rich rather than bright and flat. This is the mature, jewelry-grade red that luxury makers reserve for special-order builds, not the motorsport red of a track car.

Key Attributes

  • Blackened wine, ruby highlights: a deep, dark wine base that flashes ruby where light hits it directly and drops to dark in shadow, with fine metallic sparkle running underneath.
  • Satin metal finish: a silver-coated metalized film under the wine tint gives a soft, liquid, forged-metal sheen, reflective like chrome, but calmed down to satin instead of bright and flat.
  • Directional, handle with care: as a metalized film it's directional (orient every panel the same way) and delicate, crumpling, overstretching, or excess heat can mark the metal layer, so it rewards a careful, experienced install.
  • Smooth-laying film: a high-grade release liner lays the film flat with less orange peel, and Henkel solvent acrylic adhesive with air-release channels keeps large panels bubble-free.
  • Paint-safe removal: the adhesive stays weatherproof through the life of the wrap and heat-removes cleanly, leaving the factory finish underneath untouched.

Sangria Red changes with the light more than any solid red can. In direct sun the wine lifts to a glowing ruby and the metallic base sparks underneath, showing off the forged-metal depth. Move into shade and it collapses into a dark, almost-black wine that reads serious and expensive. The satin keeps every reflection soft and liquid rather than mirror-bright, so the color looks poured on rather than sprayed.

OEM Match

  • Shares the deep, transparent character of Mazda Soul Red Crystal, dropped into a darker wine key.
  • Closest in tone to BMW Aventurin Red Metallic and Jaguar Rossello Red, blackened wine reds with metallic depth.
  • Same jewelry-grade richness as Mercedes-Benz Patagonia Red Metallic.
    In the same family as Cadillac Black Cherry.
  • Far darker and more transparent than a bright sports red like Ferrari Rosso Corsa.

These are the mature, special-order reds luxury makers keep for grand tourers and flagship sedans. TeckWrap Sangria Red puts that forged-metal wine on an S-Class, an 8 Series, a Panamera, a Continental GT, or any car that never offered it, without the MANUFAKTUR wait list.

Features

Film Construction

  • Film Type: Polymeric hybrid film with silver coating and air-release channels
  • Series: 180 series
  • Film Thickness: 0.14 mm
  • Backing Liner Thickness: 0.11 mm
  • Total Thickness (with liner): 0.25 mm
  • Liner: Felix Schoeller 20-104-20-1,9, double-sided PE-coated Kraft, one side solventless silicone-coated, air-release (ISO 9001, ISO 14001, OHSAS 18001)
  • Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Finish: Satin, directional
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service range: -35°C to +35°C
  • 180° peel strength: 10.66 N/25mm (standard ≥6.8)
  • Initial tack: 822 g/25mm (standard 800–1500)
  • Release force: 0.1 N/25mm (standard 0.10–0.30)
  • Adhesion: 70, no shifting (standard ≥60)
  • Aging tested +65°C and -65°C: no adhesive residue
  • Storage: 2 years at +10°C to +20°C, 50% RH, in original package, away from direct sunlight

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
  • Metalized films require careful handling. The appearance of the metalized layer can change with crumpling, overstretching, or excessive heat. The film may scratch during application or daily use. The warranty does not cover the scratching of the film.

Application
  • Apply at +17°C to +23°C
  • Tools: soft squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces, avoid overstretching
  • Directional film, check orientation before cutting
  • Overlap: 3–4 mm
  • Post-heat: 95°C
  • Cure time: 24 hours above 15°C; 48 hours at room temperature recommended for maximum adhesive activation
  • Handle the satin chrome surface carefully; it can scratch during installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |