To wrap around the inside of back fenders of a hatchback is not something very tricky. But still, it is technical as the back fenders are curvy, and the vinyl wrap film tends to build...
Car wrap tips
Develop good habits for vinyl film wrapping can help you do a better job. Sometimes, these details are the key to a successful finish. And here are five crucial things that you should bear in...
Usually, when wrapping a car with vinyl wrap film, it would make the whole process much easier if you remove the hardware. You will then be able to wrap much farther inside and have a...
It is a bit tricky to wrap a curvy hood with vinyl wrap film. And if you are wrapping with a carbon film, it becomes a real challenge. It is easy to overstretch and distort...
There are more challenges to wrap a roof with vinyl wrap film when there is an antenna, as you have to spend time and energy dealing with this raised object. Thus, it is much easier...
For a bumper with deeply recessed areas where there is light and vent, the vinyl wrap film will very possibly lift over time if you wrap it in one piece, as you can overstretch it...
When coming across a wheel well that is very deep and has a steep angle, it gets a little tricky to wrap with vinyl wrap film. However, with the proper skills and right steps, you...
When wrapping a challenging section like mirror in one piece of vinyl wrap film, tension builds on the film. And it is risky even if you have done everything right. But there is one thing...
