Wrapping a Rusty Car: Is It Possible?
Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...
How to install vinyl wrap
Wrapping a Rusty Car: Is It Possible?
-
What can happen if you skip post-heating
There is a lot to consider if you want to achieve a perfect finish with vinyl wrap film: the needed size of the panels, the temperature of your workspace, the...
-
Choose right angle to hold your blade when cutting
When wrapping with vinyl wrap film, it is crucial to hold the blade at the right angle to achieve the best result. Sometimes it should be held at a 45-degree...
-
How to use Triline to achieve full coverage hood
As many vehicles are made with composite hoods today, wrapping the top edge of a hood with vinyl wrap film can become challenging sometimes. They now usually have thicker edges...
-
Should you wrap all the way under vehicle?
When wrapping up a bumper or fender with vinyl wrap film, a wrapper often has to think about how far to wrap under the vehicle to achieve a higher-quality and...
-
Wrap around hardware with high efficiency
When wrapping around hardware with vinyl wrap film, installers tend to wrap farther as they remove the parts like lights or mirrors. But how far is enough to achieve full...
-
Perfect cut for vinyl wrapping when in hot climate
Climate control is important for vinyl wrap film wrapping, because the temperature can affect not only the install but also the final production. But there might be times you...
-
Wrapping Back Bumper in Two Pieces for Long-Durability
It is common for the top area of a back bumper to get scratches or even damages due to frequent contacts because of the usage of the trunk. Thus, it...
-
How to Wrap Symmetrically on Recessed Area
For recessed area wrapping, it is common for wrappers to bridge the vinyl wrap film on the flat section over this area. However, it might lead to distortion if you...
-
What to Do When Edge of Vinyl Wrap Film Starts Lifting
As a vinyl wrap film wrapper, the ultimate goal is to achieve a paint-like finish. But sometimes, perfection does not come easily. You might figure out problems only after the...
-
Full Print Wrapping: Detail Is the Key
Full print film is a kind of visual enjoyment on the road. But if it is not wrapped properly, it becomes another story. A normal non-directional vinyl wrap film...
-
How to Be Sure Not to Overstretch Vinyl Wrap Film?
It might happen from time to time that you realize a piece of vinyl wrap film is not long enough to cover up the section that you are wrapping....
-
Full Coverage Under Back Light with Vinyl Wrap Film
When wrapping around a front light or back light with vinyl wrap film, it is challenging to wrap underneath, as there is a deep gap, and it is tricky...
-
Wrap Around Door Handle in the Middle of the Cup
For most door handles, there are several ways to wrap, which are generally similar. But for rare cases, the approach might be a little different. For example, a door handle...
