Wrapping a Rusty Car: Is It Possible?
Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...
How to install vinyl wrap
Wrapping a Rusty Car: Is It Possible?
-
Re-install door handle back to vehicle with ease
Mostly, removing hardware before vinyl film wrapping can help you achieve full coverage more easily. However, some hardware is easy to remove but tricky to re-install, for instance, a door...
-
Trimming vinyl wrap film on the body of vehicle
When you have to wrap a vehicle with a full print film or print vinyl wrap film, there are times when the white edge on the material is untrimmed. You...
-
Wrapping roof with no break on both sides
For some cars, there is no break between the roof and the two sides, which makes it challenging for vinyl film wrapping. Instead, there are two sunken gaps attached to...
-
Wrapping section by section for higher quality
It is almost like an ultimate goal for all wrappers to achieve a seamless paint-like finish. But in some cases, wrapping a vehicle in one piece might not be that...
-
Do not wrap vehicle with vinyl film when it is wet
There can be different challenges when wrapping a car with vinyl wrap film. Having the vehicle turn up wet is definitely one of those that can be intervened right away....
-
How does air egress tech work on vinyl wrap film
Over the years, more and more technologies have been developed to improve the experience in vinyl wrap film install. Air egress technology is a significant outcome among those. With...
-
Everything you need to know about gloss metallic film
Gloss metallic wrap has been one of the most popular vinyl wrap films. But to achieve a perfect finish, there are things you need to know about this type of...
-
The safe range for stretching vinyl wrap film
Overstretching is always something a wrapper needs to avoid during vinyl wrap film install. But how much exactly can you stretch without damaging the material? How much can you pull...
-
Don’t apply vinyl wrap film while ceramic coatings on
It is common to wipe over a vehicle with ceramic coating for extra protection. People apply the coating on top of a vinyl wrap film and the bare surface of...
-
Why you should wait after vinyl film wrapped on vehicle
Mostly, manufacturers would tell you clearly on the manual that it is recommended to leave a vehicle in the working space for 24 hours right after you wrap it. Yet,...
-
Three important steps you should do after vinyl film wrapping
You can never call it a “wrap up” just because you have finished wrapping a car from top to bottom with vinyl wrap film. There are three more things to...
-
How much do you know about carbon vinyl wrap film?
Carbon vinyl wrap film has been very popular in the market throughout the time. But how well do you know about it? Check out these properties below and see if...
-
Wrap back fender with sharp angles in one piece of vinyl
It is not hard to wrap most parts of a back fender, except when you get to the sharp angles by the back window and the trunk, as well as...
