A gloss car wrap is not that difficult to wrap with, and this is because of its easy-going properties. Here are some key facts about it. Let’s check out how well you know about it....
Car wrap tips
Cutting is an essential skill for every wrapper installing vinyl film. A clean cut can distinguish a perfect finish from other wrap jobs. Yet a bad cut can ruin your installation completely, especially when you...
Often, for a color-change or full print car wrap roll, there will be impressions like scratches or stripes on its surface, whether it is gloss or matte vinyl. This might be due to the roll...
The hood of Tesla is usually not complicated to wrap with vinyl film. With the right approach and workflow, it can become one easy-peasy. Here is how you can do it: Thorough prepping Before...
Sometimes, it makes the vinyl wrapping process much easier when removing all the hardware in a section. But sometimes it is not. For example, when wrapping a roof, it is not always the best option...
When wrapping a hood or roof with vinyl wrap film, you will see peaks and curves on the section. They are generally not as hard to wrap as those deeply recessed areas. However, there can...
When heating a vinyl film on recessed areas during wrapping, the uncertainty is that you might make part of it too hot and too cold on its other areas. And this is not good for...
Usually, when you stretch a vinyl wrap film, there will be tension. And if you overstretch and cut it, a significant amount of wrinkles will occur when you apply heat to the area, as the...
