Satin Wrap Installation Tips and Tricks
Satin wraps give your car a modern and high-end look, without the high gloss that comes with traditional vinyl. Whether you're wrapping the vehicle or just parts like the hood...
Installation Articles
Satin Wrap Installation Tips and Tricks
-
Vinyl wrapping: Inlay or overlay? | TeckWrap
It is common to use inlays and overlays for vinyl film wrapping. When a section is too tricky to handle, and you know that the material might not be able...
-
Quick tips for carbon hood wrapping | TeckWrap
Gloss carbon vinyl wrap film is nothing new, and some people will wrap their entire hood in carbon to create a unique customized look. There is something you should concern...
-
Fix bad rubber molding for vinyl wrapping | TeckWrap
When wrapping an old vehicle with vinyl wrap film, you may come across old rubber moldings, which are flaking off and have lots of dirt behind them. It can...
-
Vinyl wrapping with hardware: Think for the future | TeckWrap
Some installers are used to removing hardware when wrapping a section with vinyl wrap film. For example, they will take off the roof rack so they can wrap the roof...
-
Reinstall hardware after vinyl wrapping with efficiency | TeckWrap
For certain sections of a vehicle, it might be good to remove the hardware if you want to achieve full coverage when wrapping with vinyl film. There might be quite...
-
Emblem removal for vinyl wrapping with no hassle | TeckWrap
Taking off an emblem can be a great help when wrapping a vehicle with vinyl wrap film. However, emblems are primarily plastic and fragile. If you do not handle it...
-
Vinyl wrapping: Handle rubber between bumper and hood | TeckWrap
For certain types of vehicles, manufacturers have made a rubber between the front bumper and the hood. This creates a challenge for installers when doing vinyl wrapping, as it is...
-
Replace buffers more efficiently for vinyl wrapping | TeckWrap
From time to time, installers have to replace their buffer on the squeegee to ensure a perfect result for the next vinyl wrap project. Because buffers vary, sometimes they are...
-
Full print vinyl wrap: Full coverage gas lid | TeckWrap
When wrapping a gas lid with vinyl wrap film, installers tend to cut on the cover’s side and leave extra material to wrap around the inside of the tank. But...
-
Laminate matte vinyl sections with gloss pieces | TeckWrap
For specific custom vinyl wrapping projects, you might have a full print matte vinyl film that needs gloss lamination on several small graphic sections to create a unique visual effect....
-
Cutting straight line on vinyl wrap when off workspace | TeckWrap
Installers sometimes have to do vinyl film wrapping projects outside their workspace, for example, improvising on a show. This might be an unforeseen circumstance, and you are not entirely prepared....
-
Safe light prepping for PPF application | TeckWrap
As the need for paint protection film is rising, light wrapping with PPF or PVC is growing more popular. However, cleaning light is not the same as cleaning vehicle paint....
-
Efficient roof wrapping with antenna on | TeckWrap
An antenna is a challenge to wrapping a roof with vinyl film. But if you know the trick, you can be much more efficient by wrapping without removing the antenna....
