SKU: PPF290-S75+-5M

Clear S75+ Elite Paint Protection Film

(3)
Regular price €350,95
Tax included Shipping calculated at checkout.

Description

TeckWrap Clear S75+ Elite is the top-tier gloss clear paint protection film in the lineup, built on aliphatic TPU (Lubrizol ESTANE®) and backed by an 8-year warranty. It shields factory paint from stone chips, scratches, splatter, and minor abrasions while enhancing gloss for a deeper, brighter finish than bare paint.

The Lotus Effect top coat repels water and stains, and the self-healing surface reflows light scratches with heat. Higher tensile strength (20 MPa) and 390% elongation deliver stronger impact absorption and easier stretch over complex curves compared to the standard PPF290 series. In accelerated weathering tests equivalent to 9 years, ESTANE® TPU maintained appearance and physical performance.

For luxury daily drivers, exotics, performance builds, and high-end custom projects where the longest warranty and strongest protection both matter. Backed by TeckWrap's decade of paint protection film manufacturing experience and worldwide installer network.

Features

Film construction

  • Film: Aliphatic TPU, Lubrizol ESTANE® base, gloss finish
  • Top coat: Lotus Effect, solvent-resistant, stain-resistant, scratch-resistant, self-healing (TORAY)
  • Total thickness: 312 ± 10 µm
  • Application layer: 187 ± 5 µm
  • Peel adhesion: ~1500 g/inch
  • Light transmission: 90% (clear gloss optical class)
  • Roll size: 1.52 m × 15 m

Performance

  • Tensile strength: 20 MPa
  • Product elongation at break: 390%
  • Coating elongation at break: 120%
  • UV resistance: ≥95%
  • Maximum temperature: 100°C
  • Self-healing surface (minor scratches recover with heat)
  • Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

8-year warranty from production date. Scratches beyond self-healing range and impact damage not covered.

Application

  • Apply at +17°C to +23°C
  • Wet application with slip and tack solutions
  • Tools: squeegee with soft buffer, heat gun, knife, microfiber
  • Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
  • Adhesive cures fully at room temperature within 1 week
  • Cure: 24–48 hours before water exposure
  • Avoid waxing or pressure-washing for the first 7 days
  • Surface must be thoroughly cleaned and decontaminated before install

Disclaimer

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.