Matte Sable Black Vinyl Wrap (TC01)

Sable Black is the softest of TeckWrap's blacks. Where a dead-flat matte reads hard and technical, this one looks deep and velvety, closer to brushed suede than to primer. One buyer rated it the best soft black they had used, and that is the idea, a rich black with just enough softness to look expensive up close.

Key Attributes

• Soft, velvety black: a deep matte with a smooth, suede-like surface that looks richer and warmer than a hard flat black.
• Low, even glare: the finish keeps reflections soft and diffused, so the color stays deep in both sun and shade.
• Henkel adhesive: solvent acrylic adhesive that stays clear and holds up to sun, rain, and regular washing.
• Clean removal: comes off with heat and leaves the factory paint underneath unharmed.
• Wraps edges and curves: air-release channels and a stretchable film follow panels, edges, and moderate recesses.

Sable Black trades the hard, technical look of a dead-flat matte for something softer. In low light it reads as a deep, even black with a faint velvet softness. In direct sun it stays calm, with none of the hard glare of gloss. The depth is what people notice. It looks plush rather than flat, which is why it sits well on luxury sedans and SUVs. Use it when you want a black that feels expensive instead of aggressive.

OEM Match

• Softer and warmer than a standard dead-flat matte black.
• Close in mood to Mercedes designo magno black.
• A velvety alternative to BMW Frozen Black.
• Reads almost like a low satin black in some light.

Soft matte blacks like this are factory options on high-end sedans and SUVs. TeckWrap Sable Black puts that look on any car, and it comes off cleanly when you want a change.

Specifications

• Film Thickness: 0.12 mm
• Backing Liner Thickness: 0.11 mm
• Total Thickness (with liner): 0.23 mm
• Film Type: Premium-grade polymeric hybrid film with air-release channels
• Series: 180 Series

Adhesive & Liner

• Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Release Liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double-side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 14001, OHSAS 18001)

Performance

• Storing Period: 3 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place
• Durability / Warranty: Datasheet (Click the link)
• Dimensional Stability: Shrinkage less than 0.20%
• Plastification: 25%–32%
• Breaking Strength: 30.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
• 180º Peel Strength, to Steel Panel: 9 N/10mm (Average) Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure:

Test Method ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 / Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/(m2•nm)@340nm, four h condensation at (50±2.5)℃ BPT, Exposure duration: 48h

Install tips:

Temperature: from +18°С to 20°С, usage from -30°С to +30°С
Tools: Standard squeegee with a soft buffer
Conformability: smooth and medium curved surface
Directional: yes
Overlap width: 3-4mm

Package: Roll width 152 cm, length 18 m, weight 13 kg

The protective cap should be peeled off before installation.

Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.