Coral Peach (RB08-HD) Vinyl Wrap

Are you a dedicated explorer? Claim your invitation for discovery in TeckWrap Coral Peach, the color that encourages you to seek out new experiences. Order now to embrace the surprising unknown.

Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to quickly wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. 

Specifications

• Material: Conformable polymeric material with stable color pigments; suitable for full car wrapping or any smooth/curved surface
• Film Thickness: 122 μm
• Release Liner Thickness: 142 μm
• Note: Products with "HD" in the SKU feature a plastic release liner (high-gloss films)
• Type of Film: Premium-grade polymeric multilayered hybrid vinyl film with air-release channels
• Roll Size: Standard 1.52 m × 18 m (59.8" × 708.6", 4.98 ft × 59 ft, 1.66 yd × 19.6 yd)
• Series: 190 Series
• Adhesive: Henkel solvent-based acrylic, transparent, ultra-weather-resistant, viscosity 1000–3000 cps, thickness 12 μm dry
• Storage Period: 2 years if stored at +10°C to +20°C, relative humidity 50%, in original packaging, away from direct sunlight, in a clean and dry place
• Durability / Warranty: Click for Datasheet

Performance & Testing

• Release Force (N/25mm): Standard 0.10–0.30 | Result 0.17 (23°C, 54% RH)
• Initial Tack (g/25mm): Standard 800–1500 | Result 840 (23°C, 54% RH)
• 180° Peel Strength (N/25mm): Standard ≥6.8 | Result 8.7 (23°C, 54% RH)
• Adhesion Strength: Standard ≥60 | Result 70 (No shifting)

Aging Tests

• High Temperature (65°C, 7 days): No adhesive residue
• Low Temperature (-65°C, 10 days): No adhesive residue

Recommended Tools

Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application Instructions

• Application Temperature: +17°C to +18°C
• Usage Temperature: -45°C to +45°C
• Method: Standard methods for calendered films; avoid overstretching; post-heating recommended
• Post-Heating Temperature: 100°C
• Cure Time: 24 hours above 10°C
• Aftercare: PH-neutral products; avoid wax or solvents
• Directional: Yes
• Tools for Application: Soft squeegees with buffers
• Protective Layer: Peel off before installation

Important Notes

• Screen images, colors, and finishes are approximate; always check a physical color swatch
• Use rolls from the same production LOT for consistent color coverage
• Slight batch-to-batch variations may occur
• Film may scratch during installation or daily use; scratches are not covered under warranty