Wrapping a Rusty Car: Is It Possible?
Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...
How to install vinyl wrap
Wrapping a Rusty Car: Is It Possible?
-
Wrapping hatchback trunk in two pieces of vinyl wrap film
Many hatchback trunks are not difficult to wrap with vinyl wrap film. But there are specific trunks that are quite tricky because they have a thick and solid rear part...
-
Fuel cap in perfect full coverage with vinyl wrap film
When wrapping up a fuel cap area with vinyl wrap film, most installers tend to make the blade of the knife parallel to the cap side (which can also be...
-
Wrap with non-air-release vinyl wrap film on roof
Wrapping with vinyl wrap film with no air-release technology is always tricky as the material tends to be aggressive. And it can be very challenging to wrap a roof of...
-
Perfect cut under side window molding for vinyl wrap film
When wrapping a vehicle with vinyl wrap film, it becomes a little tricky when it comes to the bottom moldings of side windows. Installers usually tend to bridge the material...
-
Why Knifeless Tape matters on curvy surface when wrapping
There are many precut vinyl stripes available out there in the market, which are very convenient for partial vinyl wrapping projects. But when you have to apply it to a...
-
Mend bad cut around molding without having to re-do anything
When you wrap up a section with a very tight molding that have metal inside, for instance, a window, you might want to leave the molding on during your install...
-
A complete guide to Knifeless Tape
Knifeless Tape is an excellent tool for vinyl film wrapping, especially on tricky sections. But if you do not know the correct way to use it, it will not work...
-
Make adaptable overlap to achieve perfect finish
To wrap up a vehicle section in one piece of vinyl wrap film can be very challenging sometimes. Even if you manage to do it in the end, the quality...
-
Wrapping up fuel cap with steep angles
When coming across a fuel cap with a raised object, some installers might neglect this tiny spot when wrapping the section with vinyl wrap film. This raised object is used...
-
Quick way to wrap around emblems with vinyl wrap film
For most vehicles, the model will be presented somewhere on the car in the form of emblems. And it is very energy-consuming to wrap around this area with vinyl wrap...
-
Safe way to wrap up roof with gaps with vinyl wrap film
For many vehicles, especially those with racks, there are moldings on the roof located on top of the driver side and the passenger side. It is usually not hard to...
-
Quick and safe: Save backing paper for your next vinyl wrap install
A backing paper of a vinyl wrap film often gets thrown away straight after an install is finished. But if you can save it for your next project, it is...
-
Right direction to apply for directional vinyl wrap film
Directional vinyl wrap film is common in color change projects. There are already many guidelines out there to teach people how to handle it properly so that a directional film...
