How To Vinyl Wrap A Spoiler
Your spoiler takes the worst of the sun and road debris, and its curves, tight edges, and bolt holes make it the perfect practice piece for vinyl wrapping. This guide...
Installation Articles
How To Vinyl Wrap A Spoiler
-
Avoid overstretch on smaller side of door handle
When wrapping a door handle with vinyl wrap film, it is easy to overstretch the material on the small part of the handle, although the same method can work fine...
-
Cleaning workflow for vinyl film wrapping
Cleaning is always the first step to a successful wrap job. But did you know there is a particular workflow for this process? Follow it properly, and you can make...
-
Higher efficiency: Wrapping bumper with vinyl
Bumper wrapping is not new for most wrappers. But to wrap more efficiently with high quality is always the ultimate goal. Here are some tips that might inspire you: ...
-
Create straight line for your vinyl wrap job
Creating a straight line is very helpful, especially when you need to apply a partial vinyl wrap film like a stripe, for example, on a hood or doors. But as...
-
Fixing wrinkles when vinyl wrap film is already on the body
There are times when wrinkles and bunches occur section by section while the vinyl wrap film is already on the body of the vehicle. In this case, it can be...
-
Forming vinyl wrap film into recessed areas
Usually, different types of recessed areas can appear around sections like mirrors, bumpers, or lights. Some of them might have sharp angles, which is tricky to wrap with vinyl wrap...
-
Fixing poorly cut vinyl wrap film around window molding
There are times when you accidentally make a nasty cut on vinyl wrap film, or you have to make up for the mistakes others made. But it is always costly...
-
Wrapping hood with efficient vinyl film cutting
Hood is a typical section for vinyl film wrapping. Some of them are easy to handle, and others are not. How to wrap a hood efficiently is like a must-learn...
-
Double-check for surface prep with vinyl film liner
Cleaning is always the first step to a successful vinyl wrap job. The performance and durability of a vinyl wrap film can be affected if the vehicle is not clean...
-
Proper work sequence for vinyl film wrapping
It is always essential to have a sequential order and the right logic when doing a vinyl wrap job. Both can provide you with a faster workflow with a higher...
-
Cut off excess vinyl film clean on crucial areas
It is always challenging to cut off excess vinyl wrap film clean on critical areas like a trunk, hood, or hatchback without cutting on the body of the vehicle. Knifeless...
-
Achieve tension free lower bumper with vinyl wrap film
A lower bumper can be challenging to wrap. One mistake can lead to the lifting of vinyl in the short term. However, with proper skills and techniques, this problem is...
-
Document your vinyl wrap job to reflect and improve
Removing a vinyl wrap film is straightforward. But if it is a finish that you created, the removal can be a good opportunity to reflect and learn from experience. To...
