SKU: CG46-HD-5M

High Gloss Sahara Beige Vinyl Wrap (CG46-HD)

(2)
€205,95
Tax included Shipping calculated at checkout.

Description

Many beige wraps look muddy tan or yellow under direct sunlight. TeckWrap's Sahara Beige holds a warm champagne-sand tone instead, with cream and peach moving through it as the light changes. 

Key Attributes

  • Warm without going flat: a champagne-sand base cycles through cream and peach instead of changing to flat tan. 
  • Weatherproof adhesion: transparent Henkel solvent acrylic adhesive holds through harsh weather. 
  • Bubble-free install: polymeric hybrid film with air-release channels lays flat with no bubbles or pockets.
  • Clean lay, clean finish: high-grade PET release liner keeps the film flat during application for an even surface. 
  • Conforms with heat: wraps around mirrors, curves, edges, and moderate recessed panels without peeling or lifting.
  • Paint stays protected: adhesive removes clean, without damaging the factory finish.

TeckWrap’s Sahara Beige shifts between cream, peach, and champagne as the light changes, never settling into a single shade. It takes cues from luxury sandstone, desert sunlight, and polished champagne ceramics. Direct sunlight reveals a brighter champagne character, while overcast conditions bring out a richer desert-beige tone. It maintains depth and movement across the entire vehicle. It pairs naturally with black trim, bronze wheels, and tinted glass.    

OEM Match

  • Closest to Land Rover Satin Champagne.  
  • Same tone as Bentley's champagne-sand Mulliner. 
  • Lighter than Rolls-Royce Desert Pearl. 
  • Same depth as Mercedes MANUFAKTUR champagne-sand metallics.
  • Same saturation as Porsche Cashmere Beige.

Mercedes, Rolls-Royce, and Bentley lock this tone to their top trims. TeckWrap’s Sahara Beige Vinyl puts it on the vehicle parked in your driveway.

Features

Film Construction

Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish

Film Thickness: 0.14 mm

Release Liner Thickness: 0.03 mm

Backing Liner Thickness: 0.13 mm

Total Thickness (with liner): 0.30 mm

Liner Thickness: 142 µm plastic (HD high-gloss)

Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry

Top Layer: PET protective layer (peel before heating)

Roll Width: 5 ft (1.52 m)

Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application
  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |