
Wrapping around Side Molding with One Piece Vinyl Wrap Film
Wrapping around side molding can be very difficult because of the tricky corners, especially when you have to do a color change project. Some installers like to make a small...
Wrapping around side molding can be very difficult because of the tricky corners, especially when you have to do a color change project. Some installers like to make a small...
Vehicles vary. And their front bumpers also have different styles. But what remains the same is that they all have some kinds of corners and recessed areas. And the trickiest...
Reading the vinyl wrap film is a must for every wrap job in order to get rid of bubbles or wrinkles on material and create glass. It might be not...
It is not unusual that vehicles have different kinds of moldings at the top of doors. But there are some very tricky ones with chrome on the upper portion of...
Full print film is nothing new to most people, especially for those who value advertisement or think a big deal of the appearance on a vehicle. However, there are...
When wrapping a mirror, the most common and proper way to do is to start from the back of the corner – Starting from the hardest part, and save the...
Whether you are a beginner installer or advanced installer, you would definitely come across with the time when you have to deal with really tricky situation. We have talked about...
There are times when your vehicle wrap film gets really cooked like wrinkles bunching up sections by sections, especially when you are a beginning installer. But picking up a panel...
There are times when your vehicle accidentally hits somewhere on the sides as it comes out from a place like a grove or a garage, and there are scuff marks...
In this article, we will be looking at a technique to wrap a mirror to the edge in one piece without getting any fingers, distortion, or long term durability issues,...
When installers are wrapping door handle, it is very common that they would easily overstretch the vehicle wrap film on the smaller part of the door handle, which can be...
Whenever we do wrapping, there are times we have to cut out excess films. Today we will be looking at the part around tight window molding and showing you the...
Often times, when installers apply with PPF film and cut off the corner, they would basically take the material to the top and face the surface, then cut it away...