Satin Chrome



With a collection of twelve elegant colors, TeckWrap offers you this series of satin chrome vinyl wraps. This luster film gives your vehicle a glossy finish, not too shiny. As a proud supplier, TeckWrap has plenty of film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices. 


Conformable and flexible hybrid material. Designed for car wrapping (the smooth or medium curved surface). 

The thickness of the film(um): 128
The thickness of the release liner(um): 179

Type of film: Polymeric vinyl film (silver coating) with new air-release channels

Series: 180 series

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Durability/Warranty: Datasheet (Click the link)

Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 822 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 10,66 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Package: Roll width 152 cm, length 18 or 23m

    Install tips:

    Temperature: +17-18°С, usage from -35°С to +35°С
    Tools: Standard squeegee with soft (wet) buffer
    Conformability: smooth and medium curved surface
    Directional: yes
    Overlap width: 3-4mm

    Post heating: 90 Celcius


    Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, or too strong heating. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.

    Сaution:  Before purchasing and using, a customer shall determine the product's suitability for its intended use and should have experience wrapping metalized films. The current film has a limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend using a steam vacuum or IRR heater for installation. The dry application only. 

    Customer Reviews

    Based on 2 reviews Write a review
    Customer Reviews
    4.2 Based on 23 Reviews
    5 ★
    4 ★
    3 ★
    2 ★
    1 ★
    Write a Review Ask a Question

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
    Jeff S.
    United States

    please respond.

    The material that I have received from your company will not work for us. We have have installers that have been installing wraps for 18-20 years on staff and can not use this material. We started with the roof on passenger car and one person could not move vinyl after laying on top with backing removed. It instantly stuck BEFORE SQUEEGE. Is there anything that can be done? I feel like it is either old stock or this material was not intended on being used for vehicle wraps. Please let me know what your policy is. Thank you. Jeff

    Dennis A.
    United States United States


    I do not recall ordering this red! Please forward my original order Thank you

    Amber P.
    United States United States

    Terrible. Does not stick

    Terrible i have to buy another brand because this is not sticking.. I have purchased an entire roll of the red chrome before it it worked great.. this color is terrible.. never buy again..

    Dysturbance G.
    United States United States


    From picking up the vinyl , the service , and opening up the package it was all an success !! I love that tech wrap takes pride in thier packaging !! Money well spent


    Teckwrap Main

    Thank you ) you are welcome!

    Yunior J.
    United States United States

    Sating chrome


    Delivery terms

    The order processing time is 24 hours. We ship on working days (Monday-Friday) and provide tracking numbers within 48 hours from the order time.
    The orders are shipped with FedEx, UPS and DHL. The average days to Delivery by Carrier: FedEx International 7-8 days, UPS International 6-8 days, UPS Domestic 2-3 days and DHL 7 days.

    For US and Canada customers - Free domestic shipping is available from local warehouses on full 18-meter (59 ft, 19 yds) rolls. Please reach your sales manager for details.



    The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatches. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.