High Gloss Metallic vinyl wrap (RB-HD) Collection 1

Q878.00 Q4,627.00

Description

Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels.  Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to easily wrap around every edge and recessed area of your vehicle.  Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. 

Specifications

Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). 

The thickness of the film(um): 122
The thickness of the release liner(um): 142

Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)

Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels 

Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)

Series: 190 series

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
001)

Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place

Durability/Warranty: Datasheet (Click the link)

Application: from +17°C to +18°C, usage from -45°C to +45°C

 

Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H)

Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H)

180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H)

Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)

    Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue

    Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue

    Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

    Application method: Standard methods for calendered films. No overstretching. Post heating

    Post-heating temperature: 100°C

    Cure time: 24 hours above 10°C

    Aftercare: PH neutral, Avoid wax or solvents

    Directional: Yes

    Tools: soft squeegees with buffers

    The protective cap should be peeled off before installation.

    Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty. 

    Customer Reviews

    Based on 1 review Write a review
    Customer Reviews
    4.7 Based on 12 Reviews
    5 ★
    83% 
    10
    4 ★
    8% 
    1
    3 ★
    0% 
    0
    2 ★
    8% 
    1
    1 ★
    0% 
    0
    Write a Review Ask a Question

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
    PT
    09/02/2022
    Papa T.
    United States United States

    Peach � pearl

    Amazing Wrap! The technology of this wrap is amazing!. Really easy to wrap. Take a shot at it. You will have a great experience wrapping for the first time. With applied patience.

    09/03/2022

    Teckwrap Main

    Thank you for your feedback

    RT
    08/22/2022
    Russell T.
    United States United States

    Good product. Will use again.

    Overall was great. I have mostly used 3m to this point and there definitely were some differences. I did like the thicker and rubbery feel of the TeckWrap. It seemed to take heat better as well. The main downside was the initial tack of the adhesive. Repositioning is much more difficult than with the 3m. I believe this is due to them using a pressure sensitive adhesive.

    08/22/2022

    Teckwrap Main

    Thank you for your feedback

    QH
    08/05/2022
    Quinn H.
    United States United States

    Midnight purple

    The wrap looks AMAZING! It would help better if it showed an example of what the wrap looks like on a car in the website!

    BL
    08/03/2022
    Brian L.
    United States United States

    Film install

    Easy to work with

    JJ
    07/28/2022
    John J.
    United States United States

    Still waiting on the roll to show up. Not too happy with shipping process this time around. Turns out the roll is coming from China for some reason. May possibly be by my last time ordering from teckwrap

    08/02/2022

    Teckwrap Main

    Dear John, We are sorry you did not receive your package as promptly as you expected. We tracked down your shipment but were informed by FedEx that the package was lost during transportation. Such errors are rare but, unfortunately, do occur from time to time. We are rearranging the shipment for you, which you should receive in 5-6 business days. Again, we apologize for any inconvenience we might have caused and look forward to filling your future orders on time.

    Delivery terms

    The goods are shipped on Incoterms DDU – Delivery Duty Unpaid. The payment for the goods doesn’t include taxes and duties. Please contact us if you need assistance in customs clearance. Customers from Germany and Italy require tax number.

    Important

    The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur.