Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
Creating hinges for vinyl film wrapping
Making hinges is important during vinyl film wrapping, especially when you are working alone. Hinges can help installers secure the vinyl wrap film in the right position so that the...
-
Handle small covers on bumper with vinyl wrap film
For some vehicles, there are several plastic covers on the bumper. When you wrap it with vinyl wrap film, you can remove those covers first or leave them on. Here...
-
Wrap around back fender in one piece of vinyl wrap film
To wrap around the inside of back fenders of a hatchback is not something very tricky. But still, it is technical as the back fenders are curvy, and the vinyl...
-
Five things you must do for a successful wrap job
Develop good habits for vinyl film wrapping can help you do a better job. Sometimes, these details are the key to a successful finish. And here are five crucial things...
-
Remove back lights for easier vinyl wrapping
Usually, when wrapping a car with vinyl wrap film, it would make the whole process much easier if you remove the hardware. You will then be able to wrap much...
-
Wrapping curvy hood with carbon vinyl wrap film
It is a bit tricky to wrap a curvy hood with vinyl wrap film. And if you are wrapping with a carbon film, it becomes a real challenge. It is...
-
Remove antenna for vinyl film wrapping
There are more challenges to wrap a roof with vinyl wrap film when there is an antenna, as you have to spend time and energy dealing with this raised object....
-
Creative way to wrap deep recessed area on bumper
For a bumper with deeply recessed areas where there is light and vent, the vinyl wrap film will very possibly lift over time if you wrap it in one piece,...
-
Wrap around steep wheel well with vinyl wrap film
When coming across a wheel well that is very deep and has a steep angle, it gets a little tricky to wrap with vinyl wrap film. However, with the proper...
-
Guarantee for quality: edge seal tape
When wrapping a challenging section like mirror in one piece of vinyl wrap film, tension builds on the film. And it is risky even if you have done everything right....
-
Adjust surface energy on vinyl wrap film accordingly
There are many factors to determine whether a vinyl wrap film install is successful. Most people tend to see only the subjective reasons, including things like improper wrapping skills. But...
-
Wrapping antenna in one piece of vinyl wrap film
There are several ways to wrap an antenna with vinyl wrap film. And here is one straightforward method: wrapping it in one piece with the help of relief cuts. ...
-
Why you should post-heat the vinyl wrap at the right temperature
Post-heat is one of the essential and crucial steps throughout a vinyl wrap install. But it is never enough to just post-heat the wrap to finish up the job. It...
