SKU: CPX420M-3M

Satin Graphite Rose Color PPF (CPX420M)

CHF 194.00
Shipping calculated at checkout.

Description

We built Graphite Rose for the buyer who wanted a moody satin rose-purple and wanted that finish to add paint protection at the same time.

A muted rose-purple sitting on a graphite base, satin rather than glossy, with a soft metallic shift that stays sophisticated instead of loud.

For your vehicle

  • Satin metallic color paint protection film in a dusty rose-purple over graphite
  • Built to absorb rock chips, road grit, bug acids, and the chemical exposure that wears factory paint down
  • The top coat reflows minor scratches and swirl marks on its own under sun or warmth, keeping the satin even
  • Hydrophobic and chemical-resistant from the surface down, water sheds clean and ceramic coatings become redundant
  • Fully opaque pigmented film over a self-healing PPF base, a complete satin color change with the paint protected underneath
  • A restrained, mature rose-purple in the spirit of a Porsche Frozen Berry, with the armor built in
  • Backed by a 5-year manufacturer warranty

Two TeckWrap products can deliver a moody satin rose-purple. A satin vinyl wrap is the right call when the goal is the look, with the freedom to refresh into a different color in a couple of years and an easier-on-the-budget entry. Graphite Rose is the Color PPF route, the same dusty rose-purple satin that also defends your factory paint against stone chips and road debris from the first mile. Same finish, two valid jobs.

It belongs on builds where understatement is the flex, design-forward EVs, executive coupes, and the kind of luxury SUV whose owner wants a color nobody else on the street is running.

For installers

  • Aliphatic TPU base for impact resistance and long-term dimensional stability
  • Fluorocarbon polyurethane top coat with integrated hydrophobicity and chemical resistance
  • 344 µm total film thickness, 194 µm application layer, true PPF-class stone-chip defense
  • 22 MPa tensile strength, 1350 g/inch peel adhesion, secure hold with no lifting or tear under impact
  • 360 to 430% elongation, conforms to complex curves, mirrors, and recessed panels
  • Low-tack acrylic PSA with full repositioning capability during install
  • Ultra micro-grooved PET liner with air-release channels, dry-install system
  • Faster install than wet-application PPF, with cleaner first-pass results
  • 5-year manufacturer warranty, fully traceable for installer warranty claims

Features

Film construction

  • Film type: Premium aliphatic TPU color paint protection film
  • Top coat: Fluorocarbon polyurethane (hydrophobic, anti-yellowing, chemical resistant)
  • Total thickness: 346 ± 10 µm
  • Application layer thickness: 196 ± 10 µm
  • Adhesive: Low-tack acrylic PSA, repositionable during install
  • Adhesive peel/tack: 1350 g/inch
  • Liner: Ultra-micro-grooved PET with air-release channels
  • Finish: Gloss color PPF, Deep Amethyst violet, opaque
  • Light transmission: 0%
  • Roll size: 5ft x 59ft (1.52 x 18m)

Performance

  • Tensile strength: 22 MPa
  • Product elongation at break: 360–430%
  • Self-healing surface (minor scratches recover with heat)
  • UV-induced color stability
  • Resistant to stone chips, road grime, light abrasions, and chemical contamination
  • Dimensionally stable across temperature variations

Warranty

5-year TeckWrap warranty against yellowing, cracking, peeling, delamination, and material defects. Improper installation, physical impact damage, and scratches beyond the self-healing range are not covered.

Application
  • Apply at +17°C to +23°C
  • Service range: -40°C to +50°C
  • Dry-install system, no wet solution required (air-release channels handle film placement)
  • Tools: squeegee with soft buffer, heat gun, knife, microfiber cloth
  • Repositionable during installation due to to low-tack PSA
  • Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels
  • Post-heat: activate adhesive after final positioning
  • Cure: 24–48 hours for full adhesion
  • Use same production batch for full vehicle, label and store leftovers by batch code
  • Avoid waxing or pressure-washing for the first 7 days
  • Surface must be thoroughly cleaned and decontaminated before installation

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, consequential damages, improper installation, physical impact damage, or scratches beyond the self-healing range.

As with all premium color PPF, slight variations in hue or gloss may occur between production batches. Use the same batch for a complete vehicle and order enough material from one batch for the full job. Screen images may vary, refer to physical samples. Use same production LOT for consistency across panels.

Valuable Advices

View all
  • DIY vs. Professional Window Tint Installation

    DIY vs. Professional Window Tint Installation

    Nothing changes a vehicle's personality quite like a dark smoky tint. But it can be expensive forcing you to choose between DIY installation and hiring a professional? DIY window tinting...

    E. Adnan |

  • How To Wrap Taillights

    How To Wrap Taillights

    Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...

    E. Adnan |

  • Common Mistakes When Applying Color PPF

    Common Mistakes When Applying Color PPF

    Applying color paint protection film (PPF) can be tricky, and mistakes during the installation process can lead to bubbles, creases, and poor adhesion. Learn about the 5 most common color...

    E. Adnan |

  • When to Use Adhesive Promoters and Tack Reducers?

    When to Use Adhesive Promoters and Tack Reducers?

    Installing a car wrap isn’t just about applying vinyl—it requires skill, precision, and the right supporting products. Adhesive promoters help strengthen vinyl grip on tricky edges and curves, while tack...

    Nicki Ammelung |

  • Common Causes of Vinyl Adhesion Failure

    Common Causes of Vinyl Adhesion Failure

    Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...

    Shukhrat Ismatov |

  • Wrapping a Rusty Car: Is It Possible?

    Wrapping a Rusty Car: Is It Possible?

    Car wrapping has exploded in popularity, offering a dynamic way to personalize vehicles. But what happens when the canvas isn't pristine? Can you successfully wrap a car with rust or...

    Phyllis Li |

  • How to Wrap a Car in Winter Time

    How to Wrap a Car in Winter Time

    Wrapping a car in vinyl during winter can be challenging due to cold temperatures, but with the right preparation and tools, you can still achieve a professional finish. Work in...

    Vasile Sayfutdin |