There are times when you have to wrap with a vinyl wrap film that has white edges, which have not been trimmed off, for example, a full print film. It is quite tricky to...
Car wrap tips
When wrapping a vehicle with color change film, especially one in a light color (e.g. a white car), wrapping as far as you can on a break is the best way to make sure...
When it comes to difficult sections on vehicles while wrapping with vinyl wrap film, for example, areas around the light or molding, it is easy to accidentally cut on a place that you are...
When wrapping bumper with vinyl wrap film, especially when it comes to wrapping under the headlights, it can be quite challenging – particularly when you are doing a color change on a light color...
When wrapping a front bumper with a deep recessed area with vinyl wrap film, for instance, a vent, it is always challenging to make a cutout as you bridge the material over the area,...
When wrapping a door handle with vinyl wrap film, it is easier to deal with the longer side, because basically, all you need is to hook and pull. Even if you pull very hard,...
To wrap up corners with vinyl wrap film, the most common technique is to cold pre-stretch, create triangles, and make relief cut. But here is another trick. With this method combined, you will achieve...
The rear bumper corner on the underside is always quite challenging to wrap up with vinyl wrap film, especially when there is a steep ninety-degree angle. Many wrappers might use the common way, which...
