Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
Vinyl wrapping: Customized door handle accent | TeckWrap
There are some door handles with a tiny piece of accent in the middle, which has sharp corners and tight gaps around them. And it is tricky to install a...
-
Chrome vinyl wrap: Take the scratches away | TeckWrap
Being manufactured with multi layers, a chrome vinyl wrap is usually thick. And it is generally unlaminated, or it will be too stiff to apply. Adding the fact that it...
-
Car wrapping: Personalize your window pillars | TeckWrap
There is potential for every area on a vehicle. Even the window pillars between two doors can be personalized with vinyl wrap film. But making direct adjusting and cutting on...
-
Vinyl wrapping AMG bumper (Upper section) | TeckWrap
With a funky grill at the front and being curvy, the front bumper of a Mercedes AMG is challenging to wrap. It is easy to overstretch the vinyl wrap film...
-
Black it out: Roof molding wrapping | TeckWrap
For further customization, some people wrap their cars' roof moldings in a black vinyl wrap film. Those moldings are not giant pieces, but they usually come with curvy corners and...
-
Vinyl wrapping: Inlay or overlay? | TeckWrap
It is common to use inlays and overlays for vinyl film wrapping. When a section is too tricky to handle, and you know that the material might not be able...
-
Quick tips for carbon hood wrapping | TeckWrap
Gloss carbon vinyl wrap film is nothing new, and some people will wrap their entire hood in carbon to create a unique customized look. There is something you should concern...
-
Fix bad rubber molding for vinyl wrapping | TeckWrap
When wrapping an old vehicle with vinyl wrap film, you may come across old rubber moldings, which are flaking off and have lots of dirt behind them. It can...
-
Vinyl wrapping with hardware: Think for the future | TeckWrap
Some installers are used to removing hardware when wrapping a section with vinyl wrap film. For example, they will take off the roof rack so they can wrap the roof...
-
Reinstall hardware after vinyl wrapping with efficiency | TeckWrap
For certain sections of a vehicle, it might be good to remove the hardware if you want to achieve full coverage when wrapping with vinyl film. There might be quite...
-
Emblem removal for vinyl wrapping with no hassle | TeckWrap
Taking off an emblem can be a great help when wrapping a vehicle with vinyl wrap film. However, emblems are primarily plastic and fragile. If you do not handle it...
-
Vinyl wrapping: Handle rubber between bumper and hood | TeckWrap
For certain types of vehicles, manufacturers have made a rubber between the front bumper and the hood. This creates a challenge for installers when doing vinyl wrapping, as it is...
-
Replace buffers more efficiently for vinyl wrapping | TeckWrap
From time to time, installers have to replace their buffer on the squeegee to ensure a perfect result for the next vinyl wrap project. Because buffers vary, sometimes they are...
