Common Causes of Vinyl Adhesion Failure
Avoid Car Wrap Lifting & Peeling – Get a Flawless Finish Every TimeDIY vinyl wrapping can be challenging, and adhesion failure is one of the most common issues. From poor...
How to install vinyl wrap
Common Causes of Vinyl Adhesion Failure
-
Fender light removal for vinyl wrapping
Removing hardware can help installers wrap farther inside a section with vinyl wrap film. But different types of hardware require different kinds of skills to remove, and otherwise, you might...
-
Wrapping solid angles with vinyl film
There are corners and angles on different solid sides of a vehicle. Many of them lie in the area between the front and back doors. When wrapping them with vinyl...
-
Perfect hood wrapping without knife
When handling a hood with vinyl wrap film, wrappers tend to leave extra material around the front, wrap it behind, tuck it in, and then cut away the excess film...
-
All-in-one tips for removal of roof molding and racks
Removing hardware can usually help installers wrap farther inside a vehicle for full coverage. The same rule applies to a roof as well, especially because it can be a challenging...
-
Efficient way to wrap hood with vinyl
Cutting on a hood seems like a piece of case for most wrappers. You can consistently achieve what you want with the right approach and patience. But is there a...
-
Roof wrapping: cut off extra vinyl with knife
Wrapping a roof with vinyl wrap film can be tricky sometimes because it is easy to damage the material or the paint, especially when you try to cut off the...
-
Avoid overstretch on smaller side of door handle
When wrapping a door handle with vinyl wrap film, it is easy to overstretch the material on the small part of the handle, although the same method can work fine...
-
Cleaning workflow for vinyl film wrapping
Cleaning is always the first step to a successful wrap job. But did you know there is a particular workflow for this process? Follow it properly, and you can make...
-
Higher efficiency: Wrapping bumper with vinyl
Bumper wrapping is not new for most wrappers. But to wrap more efficiently with high quality is always the ultimate goal. Here are some tips that might inspire you: ...
-
Create straight line for your vinyl wrap job
Creating a straight line is very helpful, especially when you need to apply a partial vinyl wrap film like a stripe, for example, on a hood or doors. But as...
-
Fixing wrinkles when vinyl wrap film is already on the body
There are times when wrinkles and bunches occur section by section while the vinyl wrap film is already on the body of the vehicle. In this case, it can be...
-
Forming vinyl wrap film into recessed areas
Usually, different types of recessed areas can appear around sections like mirrors, bumpers, or lights. Some of them might have sharp angles, which is tricky to wrap with vinyl wrap...
-
Fixing poorly cut vinyl wrap film around window molding
There are times when you accidentally make a nasty cut on vinyl wrap film, or you have to make up for the mistakes others made. But it is always costly...
